Primitive Type i32 

The 32-bit signed integer type.

Implementations

impl i32

pub const MIN: Self = -2_147_483_648i32

The smallest value that can be represented by this integer type (−2³¹).

Examples

assert_eq!(i32::MIN, -2147483648);

pub const MAX: Self = 2_147_483_647i32

The largest value that can be represented by this integer type (2³¹ − 1).

Examples

assert_eq!(i32::MAX, 2147483647);

pub const fn from_le(x: Self) -> Self

Converts an integer from little endian to the target’s endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

let n = 0x1Ai32;

if cfg!(target_endian = "little") {
    assert_eq!(i32::from_le(n), n)
} else {
    assert_eq!(i32::from_le(n), n.swap_bytes())
}

pub const fn to_le(self) -> Self

Converts self to little endian from the target’s endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

let n = 0x1Ai32;

if cfg!(target_endian = "little") {
    assert_eq!(n.to_le(), n)
} else {
    assert_eq!(n.to_le(), n.swap_bytes())
}

pub const fn checked_add(self, rhs: Self) -> Option<Self>

Checked integer addition. Computes self + rhs, returning None if overflow occurred.

Examples

assert_eq!((i32::MAX - 2).checked_add(1), Some(i32::MAX - 1));
assert_eq!((i32::MAX - 2).checked_add(3), None);

pub const fn checked_sub(self, rhs: Self) -> Option<Self>

Checked integer subtraction. Computes self - rhs, returning None if overflow occurred.

Examples

assert_eq!((i32::MIN + 2).checked_sub(1), Some(i32::MIN + 1));
assert_eq!((i32::MIN + 2).checked_sub(3), None);

pub const fn checked_mul(self, rhs: Self) -> Option<Self>

Checked integer multiplication. Computes self * rhs, returning None if overflow occurred.

Examples

assert_eq!(i32::MAX.checked_mul(1), Some(i32::MAX));
assert_eq!(i32::MAX.checked_mul(2), None);

pub const fn wrapping_add(self, rhs: Self) -> Self

Wrapping (modular) addition. Computes self + rhs, wrapping around at the boundary of the type.

Examples

assert_eq!(100i32.wrapping_add(27), 127);
assert_eq!(i32::MAX.wrapping_add(2), i32::MIN + 1);

pub const fn wrapping_sub(self, rhs: Self) -> Self

Wrapping (modular) subtraction. Computes self - rhs, wrapping around at the boundary of the type.

Examples

assert_eq!(0i32.wrapping_sub(127), -127);
assert_eq!((-2i32).wrapping_sub(i32::MAX), i32::MAX);

pub const fn wrapping_neg(self) -> Self

Wrapping (modular) negation. Computes -self, wrapping around at the boundary of the type.

The only case where such wrapping can occur is when one negates MIN on a signed type (where MIN is the negative minimal value for the type); this is a positive value that is too large to represent in the type. In such a case, this function returns MIN itself.

Examples

assert_eq!(100i32.wrapping_neg(), -100);
assert_eq!((-100i32).wrapping_neg(), 100);
assert_eq!(i32::MIN.wrapping_neg(), i32::MIN);

pub const fn wrapping_abs(self) -> Self

Wrapping (modular) absolute value. Computes self.abs(), wrapping around at the boundary of the type.

The only case where such wrapping can occur is when one takes the absolute value of the negative minimal value for the type; this is a positive value that is too large to represent in the type. In such a case, this function returns MIN itself.

Examples

assert_eq!(100i32.wrapping_abs(), 100);
assert_eq!((-100i32).wrapping_abs(), 100);
assert_eq!(i32::MIN.wrapping_abs(), i32::MIN);
assert_eq!((-128i8).wrapping_abs() as u8, 128);

pub const fn unsigned_abs(self) -> u32

Computes the absolute value of self without any wrapping or panicking.

Examples

assert_eq!(100i32.unsigned_abs(), 100u32);
assert_eq!((-100i32).unsigned_abs(), 100u32);
assert_eq!((-128i8).unsigned_abs(), 128u8);

pub const fn overflowing_add(self, rhs: Self) -> (Self, bool)

Calculates self + rhs.

Returns a tuple of the addition along with a boolean indicating whether an arithmetic overflow would occur. If an overflow would have occurred then the wrapped value is returned.

Examples

assert_eq!(5i32.overflowing_add(2), (7, false));
assert_eq!(i32::MAX.overflowing_add(1), (i32::MIN, true));

pub const fn overflowing_sub(self, rhs: Self) -> (Self, bool)

Calculates self - rhs.

Returns a tuple of the subtraction along with a boolean indicating whether an arithmetic overflow would occur. If an overflow would have occurred then the wrapped value is returned.

Examples

assert_eq!(5i32.overflowing_sub(2), (3, false));
assert_eq!(i32::MIN.overflowing_sub(1), (i32::MAX, true));

pub const fn overflowing_mul(self, rhs: Self) -> (Self, bool)

Calculates the multiplication of self and rhs.

Returns a tuple of the multiplication along with a boolean indicating whether an arithmetic overflow would occur. If an overflow would have occurred then the wrapped value is returned.

Examples

assert_eq!(5i32.overflowing_mul(2), (10, false));
assert_eq!(1_000_000_000i32.overflowing_mul(10), (1410065408, true));

pub const fn abs(self) -> Self

Computes the absolute value of self.

Overflow behavior

The absolute value of i32::MIN cannot be represented as an i32, and attempting to calculate it will cause an overflow. This means that code in debug mode will trigger a panic on this case and optimized code will return i32::MIN without a panic. If you do not want this behavior, consider using unsigned_abs instead.

Examples

assert_eq!(10i32.abs(), 10);
assert_eq!((-10i32).abs(), 10);

pub const fn is_negative(self) -> bool

Returns true if self is negative and false if the number is zero or positive.

Examples

assert!((-10i32).is_negative());
assert!(!10i32.is_negative());

pub const fn to_le_bytes(self) -> [u8; 4]

Returns the memory representation of this integer as a byte array in little-endian byte order.

Examples

let bytes = 0x12345678i32.to_le_bytes();
assert_eq!(bytes, [0x78, 0x56, 0x34, 0x12]);

pub const fn to_ne_bytes(self) -> [u8; 4]

Returns the memory representation of this integer as a byte array in native byte order.

As the target platform’s native endianness is used, portable code should use to_be_bytes or to_le_bytes, as appropriate, instead.

Examples

let bytes = 0x12345678i32.to_ne_bytes();
assert_eq!(
    bytes,
    if cfg!(target_endian = "big") {
        [0x12, 0x34, 0x56, 0x78]
    } else {
        [0x78, 0x56, 0x34, 0x12]
    }
);

pub const fn from_le_bytes(bytes: [u8; 4]) -> Self

Creates an integer value from its representation as a byte array in little endian.

Examples

let value = i32::from_le_bytes([0x78, 0x56, 0x34, 0x12]);
assert_eq!(value, 0x12345678);

When starting from a slice rather than an array, fallible conversion APIs can be used:

fn read_le_i32(input: &mut &[u8]) -> i32 {
    let (int_bytes, rest) = input.split_at(size_of::<i32>());
    *input = rest;
    i32::from_le_bytes(int_bytes.try_into().unwrap())
}

pub const fn from_ne_bytes(bytes: [u8; 4]) -> Self

Creates an integer value from its memory representation as a byte array in native endianness.

As the target platform’s native endianness is used, portable code likely wants to use from_be_bytes or from_le_bytes, as appropriate instead.

Examples

let value = i32::from_ne_bytes(if cfg!(target_endian = "big") {
    [0x12, 0x34, 0x56, 0x78]
} else {
    [0x78, 0x56, 0x34, 0x12]
});
assert_eq!(value, 0x12345678);

When starting from a slice rather than an array, fallible conversion APIs can be used:

fn read_ne_i32(input: &mut &[u8]) -> i32 {
    let (int_bytes, rest) = input.split_at(size_of::<i32>());
    *input = rest;
    i32::from_ne_bytes(int_bytes.try_into().unwrap())
}

Trait Implementations

impl Add<&i32> for &i32

type Output = <i32 as Add>::Output

The resulting type after applying the + operator.

fn add(self, other: &i32) -> <i32 as Add<i32>>::Output

Performs the + operation.

impl Add<&i32> for i32

type Output = <i32 as Add>::Output

The resulting type after applying the + operator.

fn add(self, other: &i32) -> <i32 as Add<i32>>::Output

Performs the + operation.

impl Add<i32> for &i32

type Output = <i32 as Add>::Output

The resulting type after applying the + operator.

fn add(self, other: i32) -> <i32 as Add<i32>>::Output

Performs the + operation.

impl Add for i32

type Output = i32

The resulting type after applying the + operator.

fn add(self, other: i32) -> i32

Performs the + operation.

impl AddAssign<&i32> for i32

fn add_assign(&mut self, other: &i32)

Performs the += operation.

impl AddAssign for i32

fn add_assign(&mut self, other: i32)

Performs the += operation.

impl BitAnd<&i32> for &i32

type Output = <i32 as BitAnd>::Output

The resulting type after applying the & operator.

fn bitand(self, other: &i32) -> <i32 as BitAnd<i32>>::Output

Performs the & operation.

impl BitAnd<&i32> for i32

type Output = <i32 as BitAnd>::Output

The resulting type after applying the & operator.

fn bitand(self, other: &i32) -> <i32 as BitAnd<i32>>::Output

Performs the & operation.

impl BitAnd<i32> for &i32

type Output = <i32 as BitAnd>::Output

The resulting type after applying the & operator.

fn bitand(self, other: i32) -> <i32 as BitAnd<i32>>::Output

Performs the & operation.

impl BitAnd for i32

type Output = i32

The resulting type after applying the & operator.

fn bitand(self, rhs: i32) -> i32

Performs the & operation.

impl BitAndAssign<&i32> for i32

fn bitand_assign(&mut self, other: &i32)

Performs the &= operation.

impl BitAndAssign for i32

fn bitand_assign(&mut self, other: i32)

Performs the &= operation.

impl BitOr<&i32> for &i32

type Output = <i32 as BitOr>::Output

The resulting type after applying the | operator.

fn bitor(self, other: &i32) -> <i32 as BitOr<i32>>::Output

Performs the | operation.

impl BitOr<&i32> for i32

type Output = <i32 as BitOr>::Output

The resulting type after applying the | operator.

fn bitor(self, other: &i32) -> <i32 as BitOr<i32>>::Output

Performs the | operation.

impl BitOr<i32> for &i32

type Output = <i32 as BitOr>::Output

The resulting type after applying the | operator.

fn bitor(self, other: i32) -> <i32 as BitOr<i32>>::Output

Performs the | operation.

impl BitOr for i32

type Output = i32

The resulting type after applying the | operator.

fn bitor(self, rhs: i32) -> i32

Performs the | operation.

impl BitOrAssign<&i32> for i32

fn bitor_assign(&mut self, other: &i32)

Performs the |= operation.

impl BitOrAssign for i32

fn bitor_assign(&mut self, other: i32)

Performs the |= operation.

impl BitXor<&i32> for &i32

type Output = <i32 as BitXor>::Output

The resulting type after applying the ^ operator.

fn bitxor(self, other: &i32) -> <i32 as BitXor<i32>>::Output

Performs the ^ operation.

impl BitXor<&i32> for i32

type Output = <i32 as BitXor>::Output

The resulting type after applying the ^ operator.

fn bitxor(self, other: &i32) -> <i32 as BitXor<i32>>::Output

Performs the ^ operation.

impl BitXor<i32> for &i32

type Output = <i32 as BitXor>::Output

The resulting type after applying the ^ operator.

fn bitxor(self, other: i32) -> <i32 as BitXor<i32>>::Output

Performs the ^ operation.

impl BitXor for i32

type Output = i32

The resulting type after applying the ^ operator.

fn bitxor(self, other: i32) -> i32

Performs the ^ operation.

impl BitXorAssign<&i32> for i32

fn bitxor_assign(&mut self, other: &i32)

Performs the ^= operation.

impl BitXorAssign for i32

fn bitxor_assign(&mut self, other: i32)

Performs the ^= operation.

impl Clone for i32

fn clone(&self) -> Self

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

where Self:,

Performs copy-assignment from source.

impl Default for i32

fn default() -> i32

Returns the default value of 0

impl DisjointBitOr for i32

unsafe fn disjoint_bitor(self, other: Self) -> Self

🔬This is a nightly-only experimental API. (core_intrinsics_fallbacks)

See super::disjoint_bitor; we just need the trait indirection to handle different types since calling intrinsics with generics doesn’t work.

impl Div<&i32> for &i32

type Output = <i32 as Div>::Output

The resulting type after applying the / operator.

fn div(self, other: &i32) -> <i32 as Div<i32>>::Output

Performs the / operation.

impl Div<&i32> for i32

type Output = <i32 as Div>::Output

The resulting type after applying the / operator.

fn div(self, other: &i32) -> <i32 as Div<i32>>::Output

Performs the / operation.

impl Div<i32> for &i32

type Output = <i32 as Div>::Output

The resulting type after applying the / operator.

fn div(self, other: i32) -> <i32 as Div<i32>>::Output

Performs the / operation.

impl Div for i32

This operation rounds towards zero, truncating any fractional part of the exact result.

Panics

This operation will panic if other == 0 or the division results in overflow.

type Output = i32

The resulting type after applying the / operator.

fn div(self, other: i32) -> i32

Performs the / operation.

impl DivAssign<&i32> for i32

fn div_assign(&mut self, other: &i32)

Performs the /= operation.

impl DivAssign for i32

fn div_assign(&mut self, other: i32)

Performs the /= operation.

impl Mul<&i32> for &i32

type Output = <i32 as Mul>::Output

The resulting type after applying the * operator.

fn mul(self, other: &i32) -> <i32 as Mul<i32>>::Output

Performs the * operation.

impl Mul<&i32> for i32

type Output = <i32 as Mul>::Output

The resulting type after applying the * operator.

fn mul(self, other: &i32) -> <i32 as Mul<i32>>::Output

Performs the * operation.

impl Mul<i32> for &i32

type Output = <i32 as Mul>::Output

The resulting type after applying the * operator.

fn mul(self, other: i32) -> <i32 as Mul<i32>>::Output

Performs the * operation.

impl Mul for i32

type Output = i32

The resulting type after applying the * operator.

fn mul(self, other: i32) -> i32

Performs the * operation.

impl MulAssign<&i32> for i32

fn mul_assign(&mut self, other: &i32)

Performs the *= operation.

impl MulAssign for i32

fn mul_assign(&mut self, other: i32)

Performs the *= operation.

impl Neg for &i32

type Output = <i32 as Neg>::Output

The resulting type after applying the - operator.

fn neg(self) -> <i32 as Neg>::Output

Performs the unary - operation.

impl Neg for i32

type Output = i32

The resulting type after applying the - operator.

fn neg(self) -> i32

Performs the unary - operation.

impl Not for &i32

type Output = <i32 as Not>::Output

The resulting type after applying the ! operator.

fn not(self) -> <i32 as Not>::Output

Performs the unary ! operation.

impl Not for i32

type Output = i32

The resulting type after applying the ! operator.

fn not(self) -> i32

Performs the unary ! operation.

impl Ord for i32

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Self

where Self: Sized,

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self

where Self: Sized,

Compares and returns the minimum of two values.

fn clamp(self, min: Self, max: Self) -> Self

where Self: Sized,

Restrict a value to a certain interval.

impl PartialEq for i32

fn eq(&self, other: &Self) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialOrd for i32

fn partial_cmp(&self, other: &Self) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Self) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Self) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Self) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Self) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl Rem<&i32> for &i32

type Output = <i32 as Rem>::Output

The resulting type after applying the % operator.

fn rem(self, other: &i32) -> <i32 as Rem<i32>>::Output

Performs the % operation.

impl Rem<&i32> for i32

type Output = <i32 as Rem>::Output

The resulting type after applying the % operator.

fn rem(self, other: &i32) -> <i32 as Rem<i32>>::Output

Performs the % operation.

impl Rem<i32> for &i32

type Output = <i32 as Rem>::Output

The resulting type after applying the % operator.

fn rem(self, other: i32) -> <i32 as Rem<i32>>::Output

Performs the % operation.

impl Rem for i32

This operation satisfies n % d == n - (n / d) * d. The result has the same sign as the left operand.

Panics

This operation will panic if other == 0 or if self / other results in overflow.

type Output = i32

The resulting type after applying the % operator.

fn rem(self, other: i32) -> i32

Performs the % operation.

impl RemAssign<&i32> for i32

fn rem_assign(&mut self, other: &i32)

Performs the %= operation.

impl RemAssign for i32

fn rem_assign(&mut self, other: i32)

Performs the %= operation.

impl Shl<&i128> for &i32

type Output = <i32 as Shl<i128>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &i128) -> <i32 as Shl<i128>>::Output

Performs the << operation.

impl Shl<&i128> for i32

type Output = <i32 as Shl<i128>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &i128) -> <i32 as Shl<i128>>::Output

Performs the << operation.

impl Shl<&i16> for &i32

type Output = <i32 as Shl<i16>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &i16) -> <i32 as Shl<i16>>::Output

Performs the << operation.

impl Shl<&i16> for i32

type Output = <i32 as Shl<i16>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &i16) -> <i32 as Shl<i16>>::Output

Performs the << operation.

impl Shl<&i32> for &i128

type Output = <i128 as Shl<i32>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &i32) -> <i128 as Shl<i32>>::Output

Performs the << operation.

impl Shl<&i32> for &i16

type Output = <i16 as Shl<i32>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &i32) -> <i16 as Shl<i32>>::Output

Performs the << operation.

impl Shl<&i32> for &i32

type Output = <i32 as Shl>::Output

The resulting type after applying the << operator.

fn shl(self, other: &i32) -> <i32 as Shl<i32>>::Output

Performs the << operation.

impl Shl<&i32> for &i64

type Output = <i64 as Shl<i32>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &i32) -> <i64 as Shl<i32>>::Output

Performs the << operation.

impl Shl<&i32> for &i8

type Output = <i8 as Shl<i32>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &i32) -> <i8 as Shl<i32>>::Output

Performs the << operation.

impl Shl<&i32> for &isize

type Output = <isize as Shl<i32>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &i32) -> <isize as Shl<i32>>::Output

Performs the << operation.

impl Shl<&i32> for &u128

type Output = <u128 as Shl<i32>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &i32) -> <u128 as Shl<i32>>::Output

Performs the << operation.

impl Shl<&i32> for &u16

type Output = <u16 as Shl<i32>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &i32) -> <u16 as Shl<i32>>::Output

Performs the << operation.

impl Shl<&i32> for &u32

type Output = <u32 as Shl<i32>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &i32) -> <u32 as Shl<i32>>::Output

Performs the << operation.

impl Shl<&i32> for &u64

type Output = <u64 as Shl<i32>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &i32) -> <u64 as Shl<i32>>::Output

Performs the << operation.

impl Shl<&i32> for &u8

type Output = <u8 as Shl<i32>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &i32) -> <u8 as Shl<i32>>::Output

Performs the << operation.

impl Shl<&i32> for &usize

type Output = <usize as Shl<i32>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &i32) -> <usize as Shl<i32>>::Output

Performs the << operation.

impl Shl<&i32> for i128

type Output = <i128 as Shl<i32>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &i32) -> <i128 as Shl<i32>>::Output

Performs the << operation.

impl Shl<&i32> for i16

type Output = <i16 as Shl<i32>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &i32) -> <i16 as Shl<i32>>::Output

Performs the << operation.

impl Shl<&i32> for i32

type Output = <i32 as Shl>::Output

The resulting type after applying the << operator.

fn shl(self, other: &i32) -> <i32 as Shl<i32>>::Output

Performs the << operation.

impl Shl<&i32> for i64

type Output = <i64 as Shl<i32>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &i32) -> <i64 as Shl<i32>>::Output

Performs the << operation.

impl Shl<&i32> for i8

type Output = <i8 as Shl<i32>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &i32) -> <i8 as Shl<i32>>::Output

Performs the << operation.

impl Shl<&i32> for isize

type Output = <isize as Shl<i32>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &i32) -> <isize as Shl<i32>>::Output

Performs the << operation.

impl Shl<&i32> for u128

type Output = <u128 as Shl<i32>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &i32) -> <u128 as Shl<i32>>::Output

Performs the << operation.

impl Shl<&i32> for u16

type Output = <u16 as Shl<i32>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &i32) -> <u16 as Shl<i32>>::Output

Performs the << operation.

impl Shl<&i32> for u32

type Output = <u32 as Shl<i32>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &i32) -> <u32 as Shl<i32>>::Output

Performs the << operation.

impl Shl<&i32> for u64

type Output = <u64 as Shl<i32>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &i32) -> <u64 as Shl<i32>>::Output

Performs the << operation.

impl Shl<&i32> for u8

type Output = <u8 as Shl<i32>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &i32) -> <u8 as Shl<i32>>::Output

Performs the << operation.

impl Shl<&i32> for usize

type Output = <usize as Shl<i32>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &i32) -> <usize as Shl<i32>>::Output

Performs the << operation.

impl Shl<&i64> for &i32

type Output = <i32 as Shl<i64>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &i64) -> <i32 as Shl<i64>>::Output

Performs the << operation.

impl Shl<&i64> for i32

type Output = <i32 as Shl<i64>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &i64) -> <i32 as Shl<i64>>::Output

Performs the << operation.

impl Shl<&i8> for &i32

type Output = <i32 as Shl<i8>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &i8) -> <i32 as Shl<i8>>::Output

Performs the << operation.

impl Shl<&i8> for i32

type Output = <i32 as Shl<i8>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &i8) -> <i32 as Shl<i8>>::Output

Performs the << operation.

impl Shl<&isize> for &i32

type Output = <i32 as Shl<isize>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &isize) -> <i32 as Shl<isize>>::Output

Performs the << operation.

impl Shl<&isize> for i32

type Output = <i32 as Shl<isize>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &isize) -> <i32 as Shl<isize>>::Output

Performs the << operation.

impl Shl<&u128> for &i32

type Output = <i32 as Shl<u128>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &u128) -> <i32 as Shl<u128>>::Output

Performs the << operation.

impl Shl<&u128> for i32

type Output = <i32 as Shl<u128>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &u128) -> <i32 as Shl<u128>>::Output

Performs the << operation.

impl Shl<&u16> for &i32

type Output = <i32 as Shl<u16>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &u16) -> <i32 as Shl<u16>>::Output

Performs the << operation.

impl Shl<&u16> for i32

type Output = <i32 as Shl<u16>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &u16) -> <i32 as Shl<u16>>::Output

Performs the << operation.

impl Shl<&u32> for &i32

type Output = <i32 as Shl<u32>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &u32) -> <i32 as Shl<u32>>::Output

Performs the << operation.

impl Shl<&u32> for i32

type Output = <i32 as Shl<u32>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &u32) -> <i32 as Shl<u32>>::Output

Performs the << operation.

impl Shl<&u64> for &i32

type Output = <i32 as Shl<u64>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &u64) -> <i32 as Shl<u64>>::Output

Performs the << operation.

impl Shl<&u64> for i32

type Output = <i32 as Shl<u64>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &u64) -> <i32 as Shl<u64>>::Output

Performs the << operation.

impl Shl<&u8> for &i32

type Output = <i32 as Shl<u8>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &u8) -> <i32 as Shl<u8>>::Output

Performs the << operation.

impl Shl<&u8> for i32

type Output = <i32 as Shl<u8>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &u8) -> <i32 as Shl<u8>>::Output

Performs the << operation.

impl Shl<&usize> for &i32

type Output = <i32 as Shl<usize>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &usize) -> <i32 as Shl<usize>>::Output

Performs the << operation.

impl Shl<&usize> for i32

type Output = <i32 as Shl<usize>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &usize) -> <i32 as Shl<usize>>::Output

Performs the << operation.

impl Shl<i128> for &i32

type Output = <i32 as Shl<i128>>::Output

The resulting type after applying the << operator.

fn shl(self, other: i128) -> <i32 as Shl<i128>>::Output

Performs the << operation.

impl Shl<i128> for i32

type Output = i32

The resulting type after applying the << operator.

fn shl(self, other: i128) -> i32

Performs the << operation.

impl Shl<i16> for &i32

type Output = <i32 as Shl<i16>>::Output

The resulting type after applying the << operator.

fn shl(self, other: i16) -> <i32 as Shl<i16>>::Output

Performs the << operation.

impl Shl<i16> for i32

type Output = i32

The resulting type after applying the << operator.

fn shl(self, other: i16) -> i32

Performs the << operation.

impl Shl<i32> for &i128

type Output = <i128 as Shl<i32>>::Output

The resulting type after applying the << operator.

fn shl(self, other: i32) -> <i128 as Shl<i32>>::Output

Performs the << operation.

impl Shl<i32> for &i16

type Output = <i16 as Shl<i32>>::Output

The resulting type after applying the << operator.

fn shl(self, other: i32) -> <i16 as Shl<i32>>::Output

Performs the << operation.

impl Shl<i32> for &i32

type Output = <i32 as Shl>::Output

The resulting type after applying the << operator.

fn shl(self, other: i32) -> <i32 as Shl<i32>>::Output

Performs the << operation.

impl Shl<i32> for &i64

type Output = <i64 as Shl<i32>>::Output

The resulting type after applying the << operator.

fn shl(self, other: i32) -> <i64 as Shl<i32>>::Output

Performs the << operation.

impl Shl<i32> for &i8

type Output = <i8 as Shl<i32>>::Output

The resulting type after applying the << operator.

fn shl(self, other: i32) -> <i8 as Shl<i32>>::Output

Performs the << operation.

impl Shl<i32> for &isize

type Output = <isize as Shl<i32>>::Output

The resulting type after applying the << operator.

fn shl(self, other: i32) -> <isize as Shl<i32>>::Output

Performs the << operation.

impl Shl<i32> for &u128

type Output = <u128 as Shl<i32>>::Output

The resulting type after applying the << operator.

fn shl(self, other: i32) -> <u128 as Shl<i32>>::Output

Performs the << operation.

impl Shl<i32> for &u16

type Output = <u16 as Shl<i32>>::Output

The resulting type after applying the << operator.

fn shl(self, other: i32) -> <u16 as Shl<i32>>::Output

Performs the << operation.

impl Shl<i32> for &u32

type Output = <u32 as Shl<i32>>::Output

The resulting type after applying the << operator.

fn shl(self, other: i32) -> <u32 as Shl<i32>>::Output

Performs the << operation.

impl Shl<i32> for &u64

type Output = <u64 as Shl<i32>>::Output

The resulting type after applying the << operator.

fn shl(self, other: i32) -> <u64 as Shl<i32>>::Output

Performs the << operation.

impl Shl<i32> for &u8

type Output = <u8 as Shl<i32>>::Output

The resulting type after applying the << operator.

fn shl(self, other: i32) -> <u8 as Shl<i32>>::Output

Performs the << operation.

impl Shl<i32> for &usize

type Output = <usize as Shl<i32>>::Output

The resulting type after applying the << operator.

fn shl(self, other: i32) -> <usize as Shl<i32>>::Output

Performs the << operation.

impl Shl<i32> for i128

type Output = i128

The resulting type after applying the << operator.

fn shl(self, other: i32) -> i128

Performs the << operation.

impl Shl<i32> for i16

type Output = i16

The resulting type after applying the << operator.

fn shl(self, other: i32) -> i16

Performs the << operation.

impl Shl<i32> for i64

type Output = i64

The resulting type after applying the << operator.

fn shl(self, other: i32) -> i64

Performs the << operation.

impl Shl<i32> for i8

type Output = i8

The resulting type after applying the << operator.

fn shl(self, other: i32) -> i8

Performs the << operation.

impl Shl<i32> for isize

type Output = isize

The resulting type after applying the << operator.

fn shl(self, other: i32) -> isize

Performs the << operation.

impl Shl<i32> for u128

type Output = u128

The resulting type after applying the << operator.

fn shl(self, other: i32) -> u128

Performs the << operation.

impl Shl<i32> for u16

type Output = u16

The resulting type after applying the << operator.

fn shl(self, other: i32) -> u16

Performs the << operation.

impl Shl<i32> for u32

type Output = u32

The resulting type after applying the << operator.

fn shl(self, other: i32) -> u32

Performs the << operation.

impl Shl<i32> for u64

type Output = u64

The resulting type after applying the << operator.

fn shl(self, other: i32) -> u64

Performs the << operation.

impl Shl<i32> for u8

type Output = u8

The resulting type after applying the << operator.

fn shl(self, other: i32) -> u8

Performs the << operation.

impl Shl<i32> for usize

type Output = usize

The resulting type after applying the << operator.

fn shl(self, other: i32) -> usize

Performs the << operation.

impl Shl<i64> for &i32

type Output = <i32 as Shl<i64>>::Output

The resulting type after applying the << operator.

fn shl(self, other: i64) -> <i32 as Shl<i64>>::Output

Performs the << operation.

impl Shl<i64> for i32

type Output = i32

The resulting type after applying the << operator.

fn shl(self, other: i64) -> i32

Performs the << operation.

impl Shl<i8> for &i32

type Output = <i32 as Shl<i8>>::Output

The resulting type after applying the << operator.

fn shl(self, other: i8) -> <i32 as Shl<i8>>::Output

Performs the << operation.

impl Shl<i8> for i32

type Output = i32

The resulting type after applying the << operator.

fn shl(self, other: i8) -> i32

Performs the << operation.

impl Shl<isize> for &i32

type Output = <i32 as Shl<isize>>::Output

The resulting type after applying the << operator.

fn shl(self, other: isize) -> <i32 as Shl<isize>>::Output

Performs the << operation.

impl Shl<isize> for i32

type Output = i32

The resulting type after applying the << operator.

fn shl(self, other: isize) -> i32

Performs the << operation.

impl Shl<u128> for &i32

type Output = <i32 as Shl<u128>>::Output

The resulting type after applying the << operator.

fn shl(self, other: u128) -> <i32 as Shl<u128>>::Output

Performs the << operation.

impl Shl<u128> for i32

type Output = i32

The resulting type after applying the << operator.

fn shl(self, other: u128) -> i32

Performs the << operation.

impl Shl<u16> for &i32

type Output = <i32 as Shl<u16>>::Output

The resulting type after applying the << operator.

fn shl(self, other: u16) -> <i32 as Shl<u16>>::Output

Performs the << operation.

impl Shl<u16> for i32

type Output = i32

The resulting type after applying the << operator.

fn shl(self, other: u16) -> i32

Performs the << operation.

impl Shl<u32> for &i32

type Output = <i32 as Shl<u32>>::Output

The resulting type after applying the << operator.

fn shl(self, other: u32) -> <i32 as Shl<u32>>::Output

Performs the << operation.

impl Shl<u32> for i32

type Output = i32

The resulting type after applying the << operator.

fn shl(self, other: u32) -> i32

Performs the << operation.

impl Shl<u64> for &i32

type Output = <i32 as Shl<u64>>::Output

The resulting type after applying the << operator.

fn shl(self, other: u64) -> <i32 as Shl<u64>>::Output

Performs the << operation.

impl Shl<u64> for i32

type Output = i32

The resulting type after applying the << operator.

fn shl(self, other: u64) -> i32

Performs the << operation.

impl Shl<u8> for &i32

type Output = <i32 as Shl<u8>>::Output

The resulting type after applying the << operator.

fn shl(self, other: u8) -> <i32 as Shl<u8>>::Output

Performs the << operation.

impl Shl<u8> for i32

type Output = i32

The resulting type after applying the << operator.

fn shl(self, other: u8) -> i32

Performs the << operation.

impl Shl<usize> for &i32

type Output = <i32 as Shl<usize>>::Output

The resulting type after applying the << operator.

fn shl(self, other: usize) -> <i32 as Shl<usize>>::Output

Performs the << operation.

impl Shl<usize> for i32

type Output = i32

The resulting type after applying the << operator.

fn shl(self, other: usize) -> i32

Performs the << operation.

impl Shl for i32

type Output = i32

The resulting type after applying the << operator.

fn shl(self, other: i32) -> i32

Performs the << operation.

impl ShlAssign<&i128> for i32

fn shl_assign(&mut self, other: &i128)

Performs the <<= operation.

impl ShlAssign<&i16> for i32

fn shl_assign(&mut self, other: &i16)

Performs the <<= operation.

impl ShlAssign<&i32> for i128

fn shl_assign(&mut self, other: &i32)

Performs the <<= operation.

impl ShlAssign<&i32> for i16

fn shl_assign(&mut self, other: &i32)

Performs the <<= operation.

impl ShlAssign<&i32> for i32

fn shl_assign(&mut self, other: &i32)

Performs the <<= operation.

impl ShlAssign<&i32> for i64

fn shl_assign(&mut self, other: &i32)

Performs the <<= operation.

impl ShlAssign<&i32> for i8

fn shl_assign(&mut self, other: &i32)

Performs the <<= operation.

impl ShlAssign<&i32> for isize

fn shl_assign(&mut self, other: &i32)

Performs the <<= operation.

impl ShlAssign<&i32> for u128

fn shl_assign(&mut self, other: &i32)

Performs the <<= operation.

impl ShlAssign<&i32> for u16

fn shl_assign(&mut self, other: &i32)

Performs the <<= operation.

impl ShlAssign<&i32> for u32

fn shl_assign(&mut self, other: &i32)

Performs the <<= operation.

impl ShlAssign<&i32> for u64

fn shl_assign(&mut self, other: &i32)

Performs the <<= operation.

impl ShlAssign<&i32> for u8

fn shl_assign(&mut self, other: &i32)

Performs the <<= operation.

impl ShlAssign<&i32> for usize

fn shl_assign(&mut self, other: &i32)

Performs the <<= operation.

impl ShlAssign<&i64> for i32

fn shl_assign(&mut self, other: &i64)

Performs the <<= operation.

impl ShlAssign<&i8> for i32

fn shl_assign(&mut self, other: &i8)

Performs the <<= operation.

impl ShlAssign<&isize> for i32

fn shl_assign(&mut self, other: &isize)

Performs the <<= operation.

impl ShlAssign<&u128> for i32

fn shl_assign(&mut self, other: &u128)

Performs the <<= operation.

impl ShlAssign<&u16> for i32

fn shl_assign(&mut self, other: &u16)

Performs the <<= operation.

impl ShlAssign<&u32> for i32

fn shl_assign(&mut self, other: &u32)

Performs the <<= operation.

impl ShlAssign<&u64> for i32

fn shl_assign(&mut self, other: &u64)

Performs the <<= operation.

impl ShlAssign<&u8> for i32

fn shl_assign(&mut self, other: &u8)

Performs the <<= operation.

impl ShlAssign<&usize> for i32

fn shl_assign(&mut self, other: &usize)

Performs the <<= operation.

impl ShlAssign<i128> for i32

fn shl_assign(&mut self, other: i128)

Performs the <<= operation.

impl ShlAssign<i16> for i32

fn shl_assign(&mut self, other: i16)

Performs the <<= operation.

impl ShlAssign<i32> for i128

fn shl_assign(&mut self, other: i32)

Performs the <<= operation.

impl ShlAssign<i32> for i16

fn shl_assign(&mut self, other: i32)

Performs the <<= operation.

impl ShlAssign<i32> for i64

fn shl_assign(&mut self, other: i32)

Performs the <<= operation.

impl ShlAssign<i32> for i8

fn shl_assign(&mut self, other: i32)

Performs the <<= operation.

impl ShlAssign<i32> for isize

fn shl_assign(&mut self, other: i32)

Performs the <<= operation.

impl ShlAssign<i32> for u128

fn shl_assign(&mut self, other: i32)

Performs the <<= operation.

impl ShlAssign<i32> for u16

fn shl_assign(&mut self, other: i32)

Performs the <<= operation.

impl ShlAssign<i32> for u32

fn shl_assign(&mut self, other: i32)

Performs the <<= operation.

impl ShlAssign<i32> for u64

fn shl_assign(&mut self, other: i32)

Performs the <<= operation.

impl ShlAssign<i32> for u8

fn shl_assign(&mut self, other: i32)

Performs the <<= operation.

impl ShlAssign<i32> for usize

fn shl_assign(&mut self, other: i32)

Performs the <<= operation.

impl ShlAssign<i64> for i32

fn shl_assign(&mut self, other: i64)

Performs the <<= operation.

impl ShlAssign<i8> for i32

fn shl_assign(&mut self, other: i8)

Performs the <<= operation.

impl ShlAssign<isize> for i32

fn shl_assign(&mut self, other: isize)

Performs the <<= operation.

impl ShlAssign<u128> for i32

fn shl_assign(&mut self, other: u128)

Performs the <<= operation.

impl ShlAssign<u16> for i32

fn shl_assign(&mut self, other: u16)

Performs the <<= operation.

impl ShlAssign<u32> for i32

fn shl_assign(&mut self, other: u32)

Performs the <<= operation.

impl ShlAssign<u64> for i32

fn shl_assign(&mut self, other: u64)

Performs the <<= operation.

impl ShlAssign<u8> for i32

fn shl_assign(&mut self, other: u8)

Performs the <<= operation.

impl ShlAssign<usize> for i32

fn shl_assign(&mut self, other: usize)

Performs the <<= operation.

impl ShlAssign for i32

fn shl_assign(&mut self, other: i32)

Performs the <<= operation.

impl Shr<&i128> for &i32

type Output = <i32 as Shr<i128>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &i128) -> <i32 as Shr<i128>>::Output

Performs the >> operation.

impl Shr<&i128> for i32

type Output = <i32 as Shr<i128>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &i128) -> <i32 as Shr<i128>>::Output

Performs the >> operation.

impl Shr<&i16> for &i32

type Output = <i32 as Shr<i16>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &i16) -> <i32 as Shr<i16>>::Output

Performs the >> operation.

impl Shr<&i16> for i32

type Output = <i32 as Shr<i16>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &i16) -> <i32 as Shr<i16>>::Output

Performs the >> operation.

impl Shr<&i32> for &i128

type Output = <i128 as Shr<i32>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &i32) -> <i128 as Shr<i32>>::Output

Performs the >> operation.

impl Shr<&i32> for &i16

type Output = <i16 as Shr<i32>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &i32) -> <i16 as Shr<i32>>::Output

Performs the >> operation.

impl Shr<&i32> for &i32

type Output = <i32 as Shr>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &i32) -> <i32 as Shr<i32>>::Output

Performs the >> operation.

impl Shr<&i32> for &i64

type Output = <i64 as Shr<i32>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &i32) -> <i64 as Shr<i32>>::Output

Performs the >> operation.

impl Shr<&i32> for &i8

type Output = <i8 as Shr<i32>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &i32) -> <i8 as Shr<i32>>::Output

Performs the >> operation.

impl Shr<&i32> for &isize

type Output = <isize as Shr<i32>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &i32) -> <isize as Shr<i32>>::Output

Performs the >> operation.

impl Shr<&i32> for &u128

type Output = <u128 as Shr<i32>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &i32) -> <u128 as Shr<i32>>::Output

Performs the >> operation.

impl Shr<&i32> for &u16

type Output = <u16 as Shr<i32>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &i32) -> <u16 as Shr<i32>>::Output

Performs the >> operation.

impl Shr<&i32> for &u32

type Output = <u32 as Shr<i32>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &i32) -> <u32 as Shr<i32>>::Output

Performs the >> operation.

impl Shr<&i32> for &u64

type Output = <u64 as Shr<i32>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &i32) -> <u64 as Shr<i32>>::Output

Performs the >> operation.

impl Shr<&i32> for &u8

type Output = <u8 as Shr<i32>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &i32) -> <u8 as Shr<i32>>::Output

Performs the >> operation.

impl Shr<&i32> for &usize

type Output = <usize as Shr<i32>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &i32) -> <usize as Shr<i32>>::Output

Performs the >> operation.

impl Shr<&i32> for i128

type Output = <i128 as Shr<i32>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &i32) -> <i128 as Shr<i32>>::Output

Performs the >> operation.

impl Shr<&i32> for i16

type Output = <i16 as Shr<i32>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &i32) -> <i16 as Shr<i32>>::Output

Performs the >> operation.

impl Shr<&i32> for i32

type Output = <i32 as Shr>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &i32) -> <i32 as Shr<i32>>::Output

Performs the >> operation.

impl Shr<&i32> for i64

type Output = <i64 as Shr<i32>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &i32) -> <i64 as Shr<i32>>::Output

Performs the >> operation.

impl Shr<&i32> for i8

type Output = <i8 as Shr<i32>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &i32) -> <i8 as Shr<i32>>::Output

Performs the >> operation.

impl Shr<&i32> for isize

type Output = <isize as Shr<i32>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &i32) -> <isize as Shr<i32>>::Output

Performs the >> operation.

impl Shr<&i32> for u128

type Output = <u128 as Shr<i32>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &i32) -> <u128 as Shr<i32>>::Output

Performs the >> operation.

impl Shr<&i32> for u16

type Output = <u16 as Shr<i32>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &i32) -> <u16 as Shr<i32>>::Output

Performs the >> operation.

impl Shr<&i32> for u32

type Output = <u32 as Shr<i32>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &i32) -> <u32 as Shr<i32>>::Output

Performs the >> operation.

impl Shr<&i32> for u64

type Output = <u64 as Shr<i32>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &i32) -> <u64 as Shr<i32>>::Output

Performs the >> operation.

impl Shr<&i32> for u8

type Output = <u8 as Shr<i32>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &i32) -> <u8 as Shr<i32>>::Output

Performs the >> operation.

impl Shr<&i32> for usize

type Output = <usize as Shr<i32>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &i32) -> <usize as Shr<i32>>::Output

Performs the >> operation.

impl Shr<&i64> for &i32

type Output = <i32 as Shr<i64>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &i64) -> <i32 as Shr<i64>>::Output

Performs the >> operation.

impl Shr<&i64> for i32

type Output = <i32 as Shr<i64>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &i64) -> <i32 as Shr<i64>>::Output

Performs the >> operation.

impl Shr<&i8> for &i32

type Output = <i32 as Shr<i8>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &i8) -> <i32 as Shr<i8>>::Output

Performs the >> operation.

impl Shr<&i8> for i32

type Output = <i32 as Shr<i8>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &i8) -> <i32 as Shr<i8>>::Output

Performs the >> operation.

impl Shr<&isize> for &i32

type Output = <i32 as Shr<isize>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &isize) -> <i32 as Shr<isize>>::Output

Performs the >> operation.

impl Shr<&isize> for i32

type Output = <i32 as Shr<isize>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &isize) -> <i32 as Shr<isize>>::Output

Performs the >> operation.

impl Shr<&u128> for &i32

type Output = <i32 as Shr<u128>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &u128) -> <i32 as Shr<u128>>::Output

Performs the >> operation.

impl Shr<&u128> for i32

type Output = <i32 as Shr<u128>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &u128) -> <i32 as Shr<u128>>::Output

Performs the >> operation.

impl Shr<&u16> for &i32

type Output = <i32 as Shr<u16>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &u16) -> <i32 as Shr<u16>>::Output

Performs the >> operation.

impl Shr<&u16> for i32

type Output = <i32 as Shr<u16>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &u16) -> <i32 as Shr<u16>>::Output

Performs the >> operation.

impl Shr<&u32> for &i32

type Output = <i32 as Shr<u32>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &u32) -> <i32 as Shr<u32>>::Output

Performs the >> operation.

impl Shr<&u32> for i32

type Output = <i32 as Shr<u32>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &u32) -> <i32 as Shr<u32>>::Output

Performs the >> operation.

impl Shr<&u64> for &i32

type Output = <i32 as Shr<u64>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &u64) -> <i32 as Shr<u64>>::Output

Performs the >> operation.

impl Shr<&u64> for i32

type Output = <i32 as Shr<u64>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &u64) -> <i32 as Shr<u64>>::Output

Performs the >> operation.

impl Shr<&u8> for &i32

type Output = <i32 as Shr<u8>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &u8) -> <i32 as Shr<u8>>::Output

Performs the >> operation.

impl Shr<&u8> for i32

type Output = <i32 as Shr<u8>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &u8) -> <i32 as Shr<u8>>::Output

Performs the >> operation.

impl Shr<&usize> for &i32

type Output = <i32 as Shr<usize>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &usize) -> <i32 as Shr<usize>>::Output

Performs the >> operation.

impl Shr<&usize> for i32

type Output = <i32 as Shr<usize>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &usize) -> <i32 as Shr<usize>>::Output

Performs the >> operation.

impl Shr<i128> for &i32

type Output = <i32 as Shr<i128>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: i128) -> <i32 as Shr<i128>>::Output

Performs the >> operation.

impl Shr<i128> for i32

type Output = i32

The resulting type after applying the >> operator.

fn shr(self, other: i128) -> i32

Performs the >> operation.

impl Shr<i16> for &i32

type Output = <i32 as Shr<i16>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: i16) -> <i32 as Shr<i16>>::Output

Performs the >> operation.

impl Shr<i16> for i32

type Output = i32

The resulting type after applying the >> operator.

fn shr(self, other: i16) -> i32

Performs the >> operation.

impl Shr<i32> for &i128

type Output = <i128 as Shr<i32>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: i32) -> <i128 as Shr<i32>>::Output

Performs the >> operation.

impl Shr<i32> for &i16

type Output = <i16 as Shr<i32>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: i32) -> <i16 as Shr<i32>>::Output

Performs the >> operation.

impl Shr<i32> for &i32

type Output = <i32 as Shr>::Output

The resulting type after applying the >> operator.

fn shr(self, other: i32) -> <i32 as Shr<i32>>::Output

Performs the >> operation.

impl Shr<i32> for &i64

type Output = <i64 as Shr<i32>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: i32) -> <i64 as Shr<i32>>::Output

Performs the >> operation.

impl Shr<i32> for &i8

type Output = <i8 as Shr<i32>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: i32) -> <i8 as Shr<i32>>::Output

Performs the >> operation.

impl Shr<i32> for &isize

type Output = <isize as Shr<i32>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: i32) -> <isize as Shr<i32>>::Output

Performs the >> operation.

impl Shr<i32> for &u128

type Output = <u128 as Shr<i32>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: i32) -> <u128 as Shr<i32>>::Output

Performs the >> operation.

impl Shr<i32> for &u16

type Output = <u16 as Shr<i32>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: i32) -> <u16 as Shr<i32>>::Output

Performs the >> operation.

impl Shr<i32> for &u32

type Output = <u32 as Shr<i32>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: i32) -> <u32 as Shr<i32>>::Output

Performs the >> operation.

impl Shr<i32> for &u64

type Output = <u64 as Shr<i32>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: i32) -> <u64 as Shr<i32>>::Output

Performs the >> operation.

impl Shr<i32> for &u8

type Output = <u8 as Shr<i32>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: i32) -> <u8 as Shr<i32>>::Output

Performs the >> operation.

impl Shr<i32> for &usize

type Output = <usize as Shr<i32>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: i32) -> <usize as Shr<i32>>::Output

Performs the >> operation.

impl Shr<i32> for i128

type Output = i128

The resulting type after applying the >> operator.

fn shr(self, other: i32) -> i128

Performs the >> operation.

impl Shr<i32> for i16

type Output = i16

The resulting type after applying the >> operator.

fn shr(self, other: i32) -> i16

Performs the >> operation.

impl Shr<i32> for i64

type Output = i64

The resulting type after applying the >> operator.

fn shr(self, other: i32) -> i64

Performs the >> operation.

impl Shr<i32> for i8

type Output = i8

The resulting type after applying the >> operator.

fn shr(self, other: i32) -> i8

Performs the >> operation.

impl Shr<i32> for isize

type Output = isize

The resulting type after applying the >> operator.

fn shr(self, other: i32) -> isize

Performs the >> operation.

impl Shr<i32> for u128

type Output = u128

The resulting type after applying the >> operator.

fn shr(self, other: i32) -> u128

Performs the >> operation.

impl Shr<i32> for u16

type Output = u16

The resulting type after applying the >> operator.

fn shr(self, other: i32) -> u16

Performs the >> operation.

impl Shr<i32> for u32

type Output = u32

The resulting type after applying the >> operator.

fn shr(self, other: i32) -> u32

Performs the >> operation.

impl Shr<i32> for u64

type Output = u64

The resulting type after applying the >> operator.

fn shr(self, other: i32) -> u64

Performs the >> operation.

impl Shr<i32> for u8

type Output = u8

The resulting type after applying the >> operator.

fn shr(self, other: i32) -> u8

Performs the >> operation.

impl Shr<i32> for usize

type Output = usize

The resulting type after applying the >> operator.

fn shr(self, other: i32) -> usize

Performs the >> operation.

impl Shr<i64> for &i32

type Output = <i32 as Shr<i64>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: i64) -> <i32 as Shr<i64>>::Output

Performs the >> operation.

impl Shr<i64> for i32

type Output = i32

The resulting type after applying the >> operator.

fn shr(self, other: i64) -> i32

Performs the >> operation.

impl Shr<i8> for &i32

type Output = <i32 as Shr<i8>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: i8) -> <i32 as Shr<i8>>::Output

Performs the >> operation.

impl Shr<i8> for i32

type Output = i32

The resulting type after applying the >> operator.

fn shr(self, other: i8) -> i32

Performs the >> operation.

impl Shr<isize> for &i32

type Output = <i32 as Shr<isize>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: isize) -> <i32 as Shr<isize>>::Output

Performs the >> operation.

impl Shr<isize> for i32

type Output = i32

The resulting type after applying the >> operator.

fn shr(self, other: isize) -> i32

Performs the >> operation.

impl Shr<u128> for &i32

type Output = <i32 as Shr<u128>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: u128) -> <i32 as Shr<u128>>::Output

Performs the >> operation.

impl Shr<u128> for i32

type Output = i32

The resulting type after applying the >> operator.

fn shr(self, other: u128) -> i32

Performs the >> operation.

impl Shr<u16> for &i32

type Output = <i32 as Shr<u16>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: u16) -> <i32 as Shr<u16>>::Output

Performs the >> operation.

impl Shr<u16> for i32

type Output = i32

The resulting type after applying the >> operator.

fn shr(self, other: u16) -> i32

Performs the >> operation.

impl Shr<u32> for &i32

type Output = <i32 as Shr<u32>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: u32) -> <i32 as Shr<u32>>::Output

Performs the >> operation.

impl Shr<u32> for i32

type Output = i32

The resulting type after applying the >> operator.

fn shr(self, other: u32) -> i32

Performs the >> operation.

impl Shr<u64> for &i32

type Output = <i32 as Shr<u64>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: u64) -> <i32 as Shr<u64>>::Output

Performs the >> operation.

impl Shr<u64> for i32

type Output = i32

The resulting type after applying the >> operator.

fn shr(self, other: u64) -> i32

Performs the >> operation.

impl Shr<u8> for &i32

type Output = <i32 as Shr<u8>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: u8) -> <i32 as Shr<u8>>::Output

Performs the >> operation.

impl Shr<u8> for i32

type Output = i32

The resulting type after applying the >> operator.

fn shr(self, other: u8) -> i32

Performs the >> operation.

impl Shr<usize> for &i32

type Output = <i32 as Shr<usize>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: usize) -> <i32 as Shr<usize>>::Output

Performs the >> operation.

impl Shr<usize> for i32

type Output = i32

The resulting type after applying the >> operator.

fn shr(self, other: usize) -> i32

Performs the >> operation.

impl Shr for i32

type Output = i32

The resulting type after applying the >> operator.

fn shr(self, other: i32) -> i32

Performs the >> operation.

impl ShrAssign<&i128> for i32

fn shr_assign(&mut self, other: &i128)

Performs the >>= operation.

impl ShrAssign<&i16> for i32

fn shr_assign(&mut self, other: &i16)

Performs the >>= operation.

impl ShrAssign<&i32> for i128

fn shr_assign(&mut self, other: &i32)

Performs the >>= operation.

impl ShrAssign<&i32> for i16

fn shr_assign(&mut self, other: &i32)

Performs the >>= operation.

impl ShrAssign<&i32> for i32

fn shr_assign(&mut self, other: &i32)

Performs the >>= operation.

impl ShrAssign<&i32> for i64

fn shr_assign(&mut self, other: &i32)

Performs the >>= operation.

impl ShrAssign<&i32> for i8

fn shr_assign(&mut self, other: &i32)

Performs the >>= operation.

impl ShrAssign<&i32> for isize

fn shr_assign(&mut self, other: &i32)

Performs the >>= operation.

impl ShrAssign<&i32> for u128

fn shr_assign(&mut self, other: &i32)

Performs the >>= operation.

impl ShrAssign<&i32> for u16

fn shr_assign(&mut self, other: &i32)

Performs the >>= operation.

impl ShrAssign<&i32> for u32

fn shr_assign(&mut self, other: &i32)

Performs the >>= operation.

impl ShrAssign<&i32> for u64

fn shr_assign(&mut self, other: &i32)

Performs the >>= operation.

impl ShrAssign<&i32> for u8

fn shr_assign(&mut self, other: &i32)

Performs the >>= operation.

impl ShrAssign<&i32> for usize

fn shr_assign(&mut self, other: &i32)

Performs the >>= operation.

impl ShrAssign<&i64> for i32

fn shr_assign(&mut self, other: &i64)

Performs the >>= operation.

impl ShrAssign<&i8> for i32

fn shr_assign(&mut self, other: &i8)

Performs the >>= operation.

impl ShrAssign<&isize> for i32

fn shr_assign(&mut self, other: &isize)

Performs the >>= operation.

impl ShrAssign<&u128> for i32

fn shr_assign(&mut self, other: &u128)

Performs the >>= operation.

impl ShrAssign<&u16> for i32

fn shr_assign(&mut self, other: &u16)

Performs the >>= operation.

impl ShrAssign<&u32> for i32

fn shr_assign(&mut self, other: &u32)

Performs the >>= operation.

impl ShrAssign<&u64> for i32

fn shr_assign(&mut self, other: &u64)

Performs the >>= operation.

impl ShrAssign<&u8> for i32

fn shr_assign(&mut self, other: &u8)

Performs the >>= operation.

impl ShrAssign<&usize> for i32

fn shr_assign(&mut self, other: &usize)

Performs the >>= operation.

impl ShrAssign<i128> for i32

fn shr_assign(&mut self, other: i128)

Performs the >>= operation.

impl ShrAssign<i16> for i32

fn shr_assign(&mut self, other: i16)

Performs the >>= operation.

impl ShrAssign<i32> for i128

fn shr_assign(&mut self, other: i32)

Performs the >>= operation.

impl ShrAssign<i32> for i16

fn shr_assign(&mut self, other: i32)

Performs the >>= operation.

impl ShrAssign<i32> for i64

fn shr_assign(&mut self, other: i32)

Performs the >>= operation.

impl ShrAssign<i32> for i8

fn shr_assign(&mut self, other: i32)

Performs the >>= operation.

impl ShrAssign<i32> for isize

fn shr_assign(&mut self, other: i32)

Performs the >>= operation.

impl ShrAssign<i32> for u128

fn shr_assign(&mut self, other: i32)

Performs the >>= operation.

impl ShrAssign<i32> for u16

fn shr_assign(&mut self, other: i32)

Performs the >>= operation.

impl ShrAssign<i32> for u32

fn shr_assign(&mut self, other: i32)

Performs the >>= operation.

impl ShrAssign<i32> for u64

fn shr_assign(&mut self, other: i32)

Performs the >>= operation.

impl ShrAssign<i32> for u8

fn shr_assign(&mut self, other: i32)

Performs the >>= operation.

impl ShrAssign<i32> for usize

fn shr_assign(&mut self, other: i32)

Performs the >>= operation.

impl ShrAssign<i64> for i32

fn shr_assign(&mut self, other: i64)

Performs the >>= operation.

impl ShrAssign<i8> for i32

fn shr_assign(&mut self, other: i8)

Performs the >>= operation.

impl ShrAssign<isize> for i32

fn shr_assign(&mut self, other: isize)

Performs the >>= operation.

impl ShrAssign<u128> for i32

fn shr_assign(&mut self, other: u128)

Performs the >>= operation.

impl ShrAssign<u16> for i32

fn shr_assign(&mut self, other: u16)

Performs the >>= operation.

impl ShrAssign<u32> for i32

fn shr_assign(&mut self, other: u32)

Performs the >>= operation.

impl ShrAssign<u64> for i32

fn shr_assign(&mut self, other: u64)

Performs the >>= operation.

impl ShrAssign<u8> for i32

fn shr_assign(&mut self, other: u8)

Performs the >>= operation.

impl ShrAssign<usize> for i32

fn shr_assign(&mut self, other: usize)

Performs the >>= operation.

impl ShrAssign for i32

fn shr_assign(&mut self, other: i32)

Performs the >>= operation.

impl Sub<&i32> for &i32

type Output = <i32 as Sub>::Output

The resulting type after applying the - operator.

fn sub(self, other: &i32) -> <i32 as Sub<i32>>::Output

Performs the - operation.

impl Sub<&i32> for i32

type Output = <i32 as Sub>::Output

The resulting type after applying the - operator.

fn sub(self, other: &i32) -> <i32 as Sub<i32>>::Output

Performs the - operation.

impl Sub<i32> for &i32

type Output = <i32 as Sub>::Output

The resulting type after applying the - operator.

fn sub(self, other: i32) -> <i32 as Sub<i32>>::Output

Performs the - operation.

impl Sub for i32

type Output = i32

The resulting type after applying the - operator.

fn sub(self, other: i32) -> i32

Performs the - operation.

impl SubAssign<&i32> for i32

fn sub_assign(&mut self, other: &i32)

Performs the -= operation.

impl SubAssign for i32

fn sub_assign(&mut self, other: i32)

Performs the -= operation.

impl<'a> Sum<&'a i32> for i32

fn sum<I: Iterator<Item = &'a Self>>(iter: I) -> Self

Takes an iterator and generates Self from the elements by “summing up” the items.

impl Sum for i32

fn sum<I: Iterator<Item = Self>>(iter: I) -> Self

Takes an iterator and generates Self from the elements by “summing up” the items.

impl ConstParamTy_ for i32

impl Copy for i32

impl Eq for i32

impl StructuralPartialEq for i32