Primitive Type i8 

The 8-bit signed integer type.

Implementations

impl i8

pub const MIN: Self = -128i8

The smallest value that can be represented by this integer type (−2⁷).

Examples

assert_eq!(i8::MIN, -128);

pub const MAX: Self = 127i8

The largest value that can be represented by this integer type (2⁷ − 1).

Examples

assert_eq!(i8::MAX, 127);

pub const fn from_le(x: Self) -> Self

Converts an integer from little endian to the target’s endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

let n = 0x1Ai8;

if cfg!(target_endian = "little") {
    assert_eq!(i8::from_le(n), n)
} else {
    assert_eq!(i8::from_le(n), n.swap_bytes())
}

pub const fn to_le(self) -> Self

Converts self to little endian from the target’s endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

let n = 0x1Ai8;

if cfg!(target_endian = "little") {
    assert_eq!(n.to_le(), n)
} else {
    assert_eq!(n.to_le(), n.swap_bytes())
}

pub const fn wrapping_sub(self, rhs: Self) -> Self

Wrapping (modular) subtraction. Computes self - rhs, wrapping around at the boundary of the type.

Examples

assert_eq!(0i8.wrapping_sub(127), -127);
assert_eq!((-2i8).wrapping_sub(i8::MAX), i8::MAX);

pub const fn wrapping_neg(self) -> Self

Wrapping (modular) negation. Computes -self, wrapping around at the boundary of the type.

The only case where such wrapping can occur is when one negates MIN on a signed type (where MIN is the negative minimal value for the type); this is a positive value that is too large to represent in the type. In such a case, this function returns MIN itself.

Examples

assert_eq!(100i8.wrapping_neg(), -100);
assert_eq!((-100i8).wrapping_neg(), 100);
assert_eq!(i8::MIN.wrapping_neg(), i8::MIN);

pub const fn wrapping_abs(self) -> Self

Wrapping (modular) absolute value. Computes self.abs(), wrapping around at the boundary of the type.

The only case where such wrapping can occur is when one takes the absolute value of the negative minimal value for the type; this is a positive value that is too large to represent in the type. In such a case, this function returns MIN itself.

Examples

assert_eq!(100i8.wrapping_abs(), 100);
assert_eq!((-100i8).wrapping_abs(), 100);
assert_eq!(i8::MIN.wrapping_abs(), i8::MIN);
assert_eq!((-128i8).wrapping_abs() as u8, 128);

pub const fn unsigned_abs(self) -> u8

Computes the absolute value of self without any wrapping or panicking.

Examples

assert_eq!(100i8.unsigned_abs(), 100u8);
assert_eq!((-100i8).unsigned_abs(), 100u8);
assert_eq!((-128i8).unsigned_abs(), 128u8);

pub const fn is_negative(self) -> bool

Returns true if self is negative and false if the number is zero or positive.

Examples

assert!((-10i8).is_negative());
assert!(!10i8.is_negative());

pub const fn to_le_bytes(self) -> [u8; 1]

Returns the memory representation of this integer as a byte array in little-endian byte order.

Note: This function is meaningless on i8. Byte order does not exist as a concept for byte-sized integers. This function is only provided in symmetry with larger integer types. You can cast from and to u8 using cast_signed and cast_unsigned.

Examples

let bytes = 0x12i8.to_le_bytes();
assert_eq!(bytes, [0x12]);

pub const fn to_ne_bytes(self) -> [u8; 1]

Returns the memory representation of this integer as a byte array in native byte order.

As the target platform’s native endianness is used, portable code should use to_be_bytes or to_le_bytes, as appropriate, instead.

Note: This function is meaningless on i8. Byte order does not exist as a concept for byte-sized integers. This function is only provided in symmetry with larger integer types. You can cast from and to u8 using cast_signed and cast_unsigned.

Examples

let bytes = 0x12i8.to_ne_bytes();
assert_eq!(
    bytes,
    if cfg!(target_endian = "big") {
        [0x12]
    } else {
        [0x12]
    }
);

pub const fn from_le_bytes(bytes: [u8; 1]) -> Self

Creates an integer value from its representation as a byte array in little endian.

Note: This function is meaningless on i8. Byte order does not exist as a concept for byte-sized integers. This function is only provided in symmetry with larger integer types. You can cast from and to u8 using cast_signed and cast_unsigned.

Examples

let value = i8::from_le_bytes([0x12]);
assert_eq!(value, 0x12);

When starting from a slice rather than an array, fallible conversion APIs can be used:

fn read_le_i8(input: &mut &[u8]) -> i8 {
    let (int_bytes, rest) = input.split_at(size_of::<i8>());
    *input = rest;
    i8::from_le_bytes(int_bytes.try_into().unwrap())
}

pub const fn from_ne_bytes(bytes: [u8; 1]) -> Self

Creates an integer value from its memory representation as a byte array in native endianness.

As the target platform’s native endianness is used, portable code likely wants to use from_be_bytes or from_le_bytes, as appropriate instead.

Note: This function is meaningless on i8. Byte order does not exist as a concept for byte-sized integers. This function is only provided in symmetry with larger integer types. You can cast from and to u8 using cast_signed and cast_unsigned.

Examples

let value = i8::from_ne_bytes(if cfg!(target_endian = "big") {
    [0x12]
} else {
    [0x12]
});
assert_eq!(value, 0x12);

When starting from a slice rather than an array, fallible conversion APIs can be used:

fn read_ne_i8(input: &mut &[u8]) -> i8 {
    let (int_bytes, rest) = input.split_at(size_of::<i8>());
    *input = rest;
    i8::from_ne_bytes(int_bytes.try_into().unwrap())
}

Trait Implementations

impl Add<&i8> for &i8

type Output = <i8 as Add>::Output

The resulting type after applying the + operator.

fn add(self, other: &i8) -> <i8 as Add<i8>>::Output

Performs the + operation.

impl Add<&i8> for i8

type Output = <i8 as Add>::Output

The resulting type after applying the + operator.

fn add(self, other: &i8) -> <i8 as Add<i8>>::Output

Performs the + operation.

impl Add<i8> for &i8

type Output = <i8 as Add>::Output

The resulting type after applying the + operator.

fn add(self, other: i8) -> <i8 as Add<i8>>::Output

Performs the + operation.

impl Add for i8

type Output = i8

The resulting type after applying the + operator.

fn add(self, other: i8) -> i8

Performs the + operation.

impl AddAssign<&i8> for i8

fn add_assign(&mut self, other: &i8)

Performs the += operation.

impl AddAssign for i8

fn add_assign(&mut self, other: i8)

Performs the += operation.

impl BitAnd<&i8> for &i8

type Output = <i8 as BitAnd>::Output

The resulting type after applying the & operator.

fn bitand(self, other: &i8) -> <i8 as BitAnd<i8>>::Output

Performs the & operation.

impl BitAnd<&i8> for i8

type Output = <i8 as BitAnd>::Output

The resulting type after applying the & operator.

fn bitand(self, other: &i8) -> <i8 as BitAnd<i8>>::Output

Performs the & operation.

impl BitAnd<i8> for &i8

type Output = <i8 as BitAnd>::Output

The resulting type after applying the & operator.

fn bitand(self, other: i8) -> <i8 as BitAnd<i8>>::Output

Performs the & operation.

impl BitAnd for i8

type Output = i8

The resulting type after applying the & operator.

fn bitand(self, rhs: i8) -> i8

Performs the & operation.

impl BitAndAssign<&i8> for i8

fn bitand_assign(&mut self, other: &i8)

Performs the &= operation.

impl BitAndAssign for i8

fn bitand_assign(&mut self, other: i8)

Performs the &= operation.

impl BitOr<&i8> for &i8

type Output = <i8 as BitOr>::Output

The resulting type after applying the | operator.

fn bitor(self, other: &i8) -> <i8 as BitOr<i8>>::Output

Performs the | operation.

impl BitOr<&i8> for i8

type Output = <i8 as BitOr>::Output

The resulting type after applying the | operator.

fn bitor(self, other: &i8) -> <i8 as BitOr<i8>>::Output

Performs the | operation.

impl BitOr<i8> for &i8

type Output = <i8 as BitOr>::Output

The resulting type after applying the | operator.

fn bitor(self, other: i8) -> <i8 as BitOr<i8>>::Output

Performs the | operation.

impl BitOr for i8

type Output = i8

The resulting type after applying the | operator.

fn bitor(self, rhs: i8) -> i8

Performs the | operation.

impl BitOrAssign<&i8> for i8

fn bitor_assign(&mut self, other: &i8)

Performs the |= operation.

impl BitOrAssign for i8

fn bitor_assign(&mut self, other: i8)

Performs the |= operation.

impl BitXor<&i8> for &i8

type Output = <i8 as BitXor>::Output

The resulting type after applying the ^ operator.

fn bitxor(self, other: &i8) -> <i8 as BitXor<i8>>::Output

Performs the ^ operation.

impl BitXor<&i8> for i8

type Output = <i8 as BitXor>::Output

The resulting type after applying the ^ operator.

fn bitxor(self, other: &i8) -> <i8 as BitXor<i8>>::Output

Performs the ^ operation.

impl BitXor<i8> for &i8

type Output = <i8 as BitXor>::Output

The resulting type after applying the ^ operator.

fn bitxor(self, other: i8) -> <i8 as BitXor<i8>>::Output

Performs the ^ operation.

impl BitXor for i8

type Output = i8

The resulting type after applying the ^ operator.

fn bitxor(self, other: i8) -> i8

Performs the ^ operation.

impl BitXorAssign<&i8> for i8

fn bitxor_assign(&mut self, other: &i8)

Performs the ^= operation.

impl BitXorAssign for i8

fn bitxor_assign(&mut self, other: i8)

Performs the ^= operation.

impl Clone for i8

fn clone(&self) -> Self

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

where Self:,

Performs copy-assignment from source.

impl Default for i8

fn default() -> i8

Returns the default value of 0

impl Div<&i8> for &i8

type Output = <i8 as Div>::Output

The resulting type after applying the / operator.

fn div(self, other: &i8) -> <i8 as Div<i8>>::Output

Performs the / operation.

impl Div<&i8> for i8

type Output = <i8 as Div>::Output

The resulting type after applying the / operator.

fn div(self, other: &i8) -> <i8 as Div<i8>>::Output

Performs the / operation.

impl Div<i8> for &i8

type Output = <i8 as Div>::Output

The resulting type after applying the / operator.

fn div(self, other: i8) -> <i8 as Div<i8>>::Output

Performs the / operation.

impl Div for i8

This operation rounds towards zero, truncating any fractional part of the exact result.

Panics

This operation will panic if other == 0 or the division results in overflow.

type Output = i8

The resulting type after applying the / operator.

fn div(self, other: i8) -> i8

Performs the / operation.

impl DivAssign<&i8> for i8

fn div_assign(&mut self, other: &i8)

Performs the /= operation.

impl DivAssign for i8

fn div_assign(&mut self, other: i8)

Performs the /= operation.

impl Mul<&i8> for &i8

type Output = <i8 as Mul>::Output

The resulting type after applying the * operator.

fn mul(self, other: &i8) -> <i8 as Mul<i8>>::Output

Performs the * operation.

impl Mul<&i8> for i8

type Output = <i8 as Mul>::Output

The resulting type after applying the * operator.

fn mul(self, other: &i8) -> <i8 as Mul<i8>>::Output

Performs the * operation.

impl Mul<i8> for &i8

type Output = <i8 as Mul>::Output

The resulting type after applying the * operator.

fn mul(self, other: i8) -> <i8 as Mul<i8>>::Output

Performs the * operation.

impl Mul for i8

type Output = i8

The resulting type after applying the * operator.

fn mul(self, other: i8) -> i8

Performs the * operation.

impl MulAssign<&i8> for i8

fn mul_assign(&mut self, other: &i8)

Performs the *= operation.

impl MulAssign for i8

fn mul_assign(&mut self, other: i8)

Performs the *= operation.

impl Neg for &i8

type Output = <i8 as Neg>::Output

The resulting type after applying the - operator.

fn neg(self) -> <i8 as Neg>::Output

Performs the unary - operation.

impl Neg for i8

type Output = i8

The resulting type after applying the - operator.

fn neg(self) -> i8

Performs the unary - operation.

impl Not for &i8

type Output = <i8 as Not>::Output

The resulting type after applying the ! operator.

fn not(self) -> <i8 as Not>::Output

Performs the unary ! operation.

impl Not for i8

type Output = i8

The resulting type after applying the ! operator.

fn not(self) -> i8

Performs the unary ! operation.

impl Ord for i8

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Self

where Self: Sized,

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self

where Self: Sized,

Compares and returns the minimum of two values.

fn clamp(self, min: Self, max: Self) -> Self

where Self: Sized,

Restrict a value to a certain interval.

impl PartialEq for i8

fn eq(&self, other: &Self) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialOrd for i8

fn partial_cmp(&self, other: &Self) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Self) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Self) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Self) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Self) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl Rem<&i8> for &i8

type Output = <i8 as Rem>::Output

The resulting type after applying the % operator.

fn rem(self, other: &i8) -> <i8 as Rem<i8>>::Output

Performs the % operation.

impl Rem<&i8> for i8

type Output = <i8 as Rem>::Output

The resulting type after applying the % operator.

fn rem(self, other: &i8) -> <i8 as Rem<i8>>::Output

Performs the % operation.

impl Rem<i8> for &i8

type Output = <i8 as Rem>::Output

The resulting type after applying the % operator.

fn rem(self, other: i8) -> <i8 as Rem<i8>>::Output

Performs the % operation.

impl Rem for i8

This operation satisfies n % d == n - (n / d) * d. The result has the same sign as the left operand.

Panics

This operation will panic if other == 0 or if self / other results in overflow.

type Output = i8

The resulting type after applying the % operator.

fn rem(self, other: i8) -> i8

Performs the % operation.

impl RemAssign<&i8> for i8

fn rem_assign(&mut self, other: &i8)

Performs the %= operation.

impl RemAssign for i8

fn rem_assign(&mut self, other: i8)

Performs the %= operation.

impl Shl<&i128> for &i8

type Output = <i8 as Shl<i128>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &i128) -> <i8 as Shl<i128>>::Output

Performs the << operation.

impl Shl<&i128> for i8

type Output = <i8 as Shl<i128>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &i128) -> <i8 as Shl<i128>>::Output

Performs the << operation.

impl Shl<&i16> for &i8

type Output = <i8 as Shl<i16>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &i16) -> <i8 as Shl<i16>>::Output

Performs the << operation.

impl Shl<&i16> for i8

type Output = <i8 as Shl<i16>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &i16) -> <i8 as Shl<i16>>::Output

Performs the << operation.

impl Shl<&i32> for &i8

type Output = <i8 as Shl<i32>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &i32) -> <i8 as Shl<i32>>::Output

Performs the << operation.

impl Shl<&i32> for i8

type Output = <i8 as Shl<i32>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &i32) -> <i8 as Shl<i32>>::Output

Performs the << operation.

impl Shl<&i64> for &i8

type Output = <i8 as Shl<i64>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &i64) -> <i8 as Shl<i64>>::Output

Performs the << operation.

impl Shl<&i64> for i8

type Output = <i8 as Shl<i64>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &i64) -> <i8 as Shl<i64>>::Output

Performs the << operation.

impl Shl<&i8> for &i128

type Output = <i128 as Shl<i8>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &i8) -> <i128 as Shl<i8>>::Output

Performs the << operation.

impl Shl<&i8> for &i16

type Output = <i16 as Shl<i8>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &i8) -> <i16 as Shl<i8>>::Output

Performs the << operation.

impl Shl<&i8> for &i32

type Output = <i32 as Shl<i8>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &i8) -> <i32 as Shl<i8>>::Output

Performs the << operation.

impl Shl<&i8> for &i64

type Output = <i64 as Shl<i8>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &i8) -> <i64 as Shl<i8>>::Output

Performs the << operation.

impl Shl<&i8> for &i8

type Output = <i8 as Shl>::Output

The resulting type after applying the << operator.

fn shl(self, other: &i8) -> <i8 as Shl<i8>>::Output

Performs the << operation.

impl Shl<&i8> for &isize

type Output = <isize as Shl<i8>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &i8) -> <isize as Shl<i8>>::Output

Performs the << operation.

impl Shl<&i8> for &u128

type Output = <u128 as Shl<i8>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &i8) -> <u128 as Shl<i8>>::Output

Performs the << operation.

impl Shl<&i8> for &u16

type Output = <u16 as Shl<i8>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &i8) -> <u16 as Shl<i8>>::Output

Performs the << operation.

impl Shl<&i8> for &u32

type Output = <u32 as Shl<i8>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &i8) -> <u32 as Shl<i8>>::Output

Performs the << operation.

impl Shl<&i8> for &u64

type Output = <u64 as Shl<i8>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &i8) -> <u64 as Shl<i8>>::Output

Performs the << operation.

impl Shl<&i8> for &u8

type Output = <u8 as Shl<i8>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &i8) -> <u8 as Shl<i8>>::Output

Performs the << operation.

impl Shl<&i8> for &usize

type Output = <usize as Shl<i8>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &i8) -> <usize as Shl<i8>>::Output

Performs the << operation.

impl Shl<&i8> for i128

type Output = <i128 as Shl<i8>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &i8) -> <i128 as Shl<i8>>::Output

Performs the << operation.

impl Shl<&i8> for i16

type Output = <i16 as Shl<i8>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &i8) -> <i16 as Shl<i8>>::Output

Performs the << operation.

impl Shl<&i8> for i32

type Output = <i32 as Shl<i8>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &i8) -> <i32 as Shl<i8>>::Output

Performs the << operation.

impl Shl<&i8> for i64

type Output = <i64 as Shl<i8>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &i8) -> <i64 as Shl<i8>>::Output

Performs the << operation.

impl Shl<&i8> for i8

type Output = <i8 as Shl>::Output

The resulting type after applying the << operator.

fn shl(self, other: &i8) -> <i8 as Shl<i8>>::Output

Performs the << operation.

impl Shl<&i8> for isize

type Output = <isize as Shl<i8>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &i8) -> <isize as Shl<i8>>::Output

Performs the << operation.

impl Shl<&i8> for u128

type Output = <u128 as Shl<i8>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &i8) -> <u128 as Shl<i8>>::Output

Performs the << operation.

impl Shl<&i8> for u16

type Output = <u16 as Shl<i8>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &i8) -> <u16 as Shl<i8>>::Output

Performs the << operation.

impl Shl<&i8> for u32

type Output = <u32 as Shl<i8>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &i8) -> <u32 as Shl<i8>>::Output

Performs the << operation.

impl Shl<&i8> for u64

type Output = <u64 as Shl<i8>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &i8) -> <u64 as Shl<i8>>::Output

Performs the << operation.

impl Shl<&i8> for u8

type Output = <u8 as Shl<i8>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &i8) -> <u8 as Shl<i8>>::Output

Performs the << operation.

impl Shl<&i8> for usize

type Output = <usize as Shl<i8>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &i8) -> <usize as Shl<i8>>::Output

Performs the << operation.

impl Shl<&isize> for &i8

type Output = <i8 as Shl<isize>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &isize) -> <i8 as Shl<isize>>::Output

Performs the << operation.

impl Shl<&isize> for i8

type Output = <i8 as Shl<isize>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &isize) -> <i8 as Shl<isize>>::Output

Performs the << operation.

impl Shl<&u128> for &i8

type Output = <i8 as Shl<u128>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &u128) -> <i8 as Shl<u128>>::Output

Performs the << operation.

impl Shl<&u128> for i8

type Output = <i8 as Shl<u128>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &u128) -> <i8 as Shl<u128>>::Output

Performs the << operation.

impl Shl<&u16> for &i8

type Output = <i8 as Shl<u16>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &u16) -> <i8 as Shl<u16>>::Output

Performs the << operation.

impl Shl<&u16> for i8

type Output = <i8 as Shl<u16>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &u16) -> <i8 as Shl<u16>>::Output

Performs the << operation.

impl Shl<&u32> for &i8

type Output = <i8 as Shl<u32>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &u32) -> <i8 as Shl<u32>>::Output

Performs the << operation.

impl Shl<&u32> for i8

type Output = <i8 as Shl<u32>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &u32) -> <i8 as Shl<u32>>::Output

Performs the << operation.

impl Shl<&u64> for &i8

type Output = <i8 as Shl<u64>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &u64) -> <i8 as Shl<u64>>::Output

Performs the << operation.

impl Shl<&u64> for i8

type Output = <i8 as Shl<u64>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &u64) -> <i8 as Shl<u64>>::Output

Performs the << operation.

impl Shl<&u8> for &i8

type Output = <i8 as Shl<u8>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &u8) -> <i8 as Shl<u8>>::Output

Performs the << operation.

impl Shl<&u8> for i8

type Output = <i8 as Shl<u8>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &u8) -> <i8 as Shl<u8>>::Output

Performs the << operation.

impl Shl<&usize> for &i8

type Output = <i8 as Shl<usize>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &usize) -> <i8 as Shl<usize>>::Output

Performs the << operation.

impl Shl<&usize> for i8

type Output = <i8 as Shl<usize>>::Output

The resulting type after applying the << operator.

fn shl(self, other: &usize) -> <i8 as Shl<usize>>::Output

Performs the << operation.

impl Shl<i128> for &i8

type Output = <i8 as Shl<i128>>::Output

The resulting type after applying the << operator.

fn shl(self, other: i128) -> <i8 as Shl<i128>>::Output

Performs the << operation.

impl Shl<i128> for i8

type Output = i8

The resulting type after applying the << operator.

fn shl(self, other: i128) -> i8

Performs the << operation.

impl Shl<i16> for &i8

type Output = <i8 as Shl<i16>>::Output

The resulting type after applying the << operator.

fn shl(self, other: i16) -> <i8 as Shl<i16>>::Output

Performs the << operation.

impl Shl<i16> for i8

type Output = i8

The resulting type after applying the << operator.

fn shl(self, other: i16) -> i8

Performs the << operation.

impl Shl<i32> for &i8

type Output = <i8 as Shl<i32>>::Output

The resulting type after applying the << operator.

fn shl(self, other: i32) -> <i8 as Shl<i32>>::Output

Performs the << operation.

impl Shl<i32> for i8

type Output = i8

The resulting type after applying the << operator.

fn shl(self, other: i32) -> i8

Performs the << operation.

impl Shl<i64> for &i8

type Output = <i8 as Shl<i64>>::Output

The resulting type after applying the << operator.

fn shl(self, other: i64) -> <i8 as Shl<i64>>::Output

Performs the << operation.

impl Shl<i64> for i8

type Output = i8

The resulting type after applying the << operator.

fn shl(self, other: i64) -> i8

Performs the << operation.

impl Shl<i8> for &i128

type Output = <i128 as Shl<i8>>::Output

The resulting type after applying the << operator.

fn shl(self, other: i8) -> <i128 as Shl<i8>>::Output

Performs the << operation.

impl Shl<i8> for &i16

type Output = <i16 as Shl<i8>>::Output

The resulting type after applying the << operator.

fn shl(self, other: i8) -> <i16 as Shl<i8>>::Output

Performs the << operation.

impl Shl<i8> for &i32

type Output = <i32 as Shl<i8>>::Output

The resulting type after applying the << operator.

fn shl(self, other: i8) -> <i32 as Shl<i8>>::Output

Performs the << operation.

impl Shl<i8> for &i64

type Output = <i64 as Shl<i8>>::Output

The resulting type after applying the << operator.

fn shl(self, other: i8) -> <i64 as Shl<i8>>::Output

Performs the << operation.

impl Shl<i8> for &i8

type Output = <i8 as Shl>::Output

The resulting type after applying the << operator.

fn shl(self, other: i8) -> <i8 as Shl<i8>>::Output

Performs the << operation.

impl Shl<i8> for &isize

type Output = <isize as Shl<i8>>::Output

The resulting type after applying the << operator.

fn shl(self, other: i8) -> <isize as Shl<i8>>::Output

Performs the << operation.

impl Shl<i8> for &u128

type Output = <u128 as Shl<i8>>::Output

The resulting type after applying the << operator.

fn shl(self, other: i8) -> <u128 as Shl<i8>>::Output

Performs the << operation.

impl Shl<i8> for &u16

type Output = <u16 as Shl<i8>>::Output

The resulting type after applying the << operator.

fn shl(self, other: i8) -> <u16 as Shl<i8>>::Output

Performs the << operation.

impl Shl<i8> for &u32

type Output = <u32 as Shl<i8>>::Output

The resulting type after applying the << operator.

fn shl(self, other: i8) -> <u32 as Shl<i8>>::Output

Performs the << operation.

impl Shl<i8> for &u64

type Output = <u64 as Shl<i8>>::Output

The resulting type after applying the << operator.

fn shl(self, other: i8) -> <u64 as Shl<i8>>::Output

Performs the << operation.

impl Shl<i8> for &u8

type Output = <u8 as Shl<i8>>::Output

The resulting type after applying the << operator.

fn shl(self, other: i8) -> <u8 as Shl<i8>>::Output

Performs the << operation.

impl Shl<i8> for &usize

type Output = <usize as Shl<i8>>::Output

The resulting type after applying the << operator.

fn shl(self, other: i8) -> <usize as Shl<i8>>::Output

Performs the << operation.

impl Shl<i8> for i128

type Output = i128

The resulting type after applying the << operator.

fn shl(self, other: i8) -> i128

Performs the << operation.

impl Shl<i8> for i16

type Output = i16

The resulting type after applying the << operator.

fn shl(self, other: i8) -> i16

Performs the << operation.

impl Shl<i8> for i32

type Output = i32

The resulting type after applying the << operator.

fn shl(self, other: i8) -> i32

Performs the << operation.

impl Shl<i8> for i64

type Output = i64

The resulting type after applying the << operator.

fn shl(self, other: i8) -> i64

Performs the << operation.

impl Shl<i8> for isize

type Output = isize

The resulting type after applying the << operator.

fn shl(self, other: i8) -> isize

Performs the << operation.

impl Shl<i8> for u128

type Output = u128

The resulting type after applying the << operator.

fn shl(self, other: i8) -> u128

Performs the << operation.

impl Shl<i8> for u16

type Output = u16

The resulting type after applying the << operator.

fn shl(self, other: i8) -> u16

Performs the << operation.

impl Shl<i8> for u32

type Output = u32

The resulting type after applying the << operator.

fn shl(self, other: i8) -> u32

Performs the << operation.

impl Shl<i8> for u64

type Output = u64

The resulting type after applying the << operator.

fn shl(self, other: i8) -> u64

Performs the << operation.

impl Shl<i8> for u8

type Output = u8

The resulting type after applying the << operator.

fn shl(self, other: i8) -> u8

Performs the << operation.

impl Shl<i8> for usize

type Output = usize

The resulting type after applying the << operator.

fn shl(self, other: i8) -> usize

Performs the << operation.

impl Shl<isize> for &i8

type Output = <i8 as Shl<isize>>::Output

The resulting type after applying the << operator.

fn shl(self, other: isize) -> <i8 as Shl<isize>>::Output

Performs the << operation.

impl Shl<isize> for i8

type Output = i8

The resulting type after applying the << operator.

fn shl(self, other: isize) -> i8

Performs the << operation.

impl Shl<u128> for &i8

type Output = <i8 as Shl<u128>>::Output

The resulting type after applying the << operator.

fn shl(self, other: u128) -> <i8 as Shl<u128>>::Output

Performs the << operation.

impl Shl<u128> for i8

type Output = i8

The resulting type after applying the << operator.

fn shl(self, other: u128) -> i8

Performs the << operation.

impl Shl<u16> for &i8

type Output = <i8 as Shl<u16>>::Output

The resulting type after applying the << operator.

fn shl(self, other: u16) -> <i8 as Shl<u16>>::Output

Performs the << operation.

impl Shl<u16> for i8

type Output = i8

The resulting type after applying the << operator.

fn shl(self, other: u16) -> i8

Performs the << operation.

impl Shl<u32> for &i8

type Output = <i8 as Shl<u32>>::Output

The resulting type after applying the << operator.

fn shl(self, other: u32) -> <i8 as Shl<u32>>::Output

Performs the << operation.

impl Shl<u32> for i8

type Output = i8

The resulting type after applying the << operator.

fn shl(self, other: u32) -> i8

Performs the << operation.

impl Shl<u64> for &i8

type Output = <i8 as Shl<u64>>::Output

The resulting type after applying the << operator.

fn shl(self, other: u64) -> <i8 as Shl<u64>>::Output

Performs the << operation.

impl Shl<u64> for i8

type Output = i8

The resulting type after applying the << operator.

fn shl(self, other: u64) -> i8

Performs the << operation.

impl Shl<u8> for &i8

type Output = <i8 as Shl<u8>>::Output

The resulting type after applying the << operator.

fn shl(self, other: u8) -> <i8 as Shl<u8>>::Output

Performs the << operation.

impl Shl<u8> for i8

type Output = i8

The resulting type after applying the << operator.

fn shl(self, other: u8) -> i8

Performs the << operation.

impl Shl<usize> for &i8

type Output = <i8 as Shl<usize>>::Output

The resulting type after applying the << operator.

fn shl(self, other: usize) -> <i8 as Shl<usize>>::Output

Performs the << operation.

impl Shl<usize> for i8

type Output = i8

The resulting type after applying the << operator.

fn shl(self, other: usize) -> i8

Performs the << operation.

impl Shl for i8

type Output = i8

The resulting type after applying the << operator.

fn shl(self, other: i8) -> i8

Performs the << operation.

impl ShlAssign<&i128> for i8

fn shl_assign(&mut self, other: &i128)

Performs the <<= operation.

impl ShlAssign<&i16> for i8

fn shl_assign(&mut self, other: &i16)

Performs the <<= operation.

impl ShlAssign<&i32> for i8

fn shl_assign(&mut self, other: &i32)

Performs the <<= operation.

impl ShlAssign<&i64> for i8

fn shl_assign(&mut self, other: &i64)

Performs the <<= operation.

impl ShlAssign<&i8> for i128

fn shl_assign(&mut self, other: &i8)

Performs the <<= operation.

impl ShlAssign<&i8> for i16

fn shl_assign(&mut self, other: &i8)

Performs the <<= operation.

impl ShlAssign<&i8> for i32

fn shl_assign(&mut self, other: &i8)

Performs the <<= operation.

impl ShlAssign<&i8> for i64

fn shl_assign(&mut self, other: &i8)

Performs the <<= operation.

impl ShlAssign<&i8> for i8

fn shl_assign(&mut self, other: &i8)

Performs the <<= operation.

impl ShlAssign<&i8> for isize

fn shl_assign(&mut self, other: &i8)

Performs the <<= operation.

impl ShlAssign<&i8> for u128

fn shl_assign(&mut self, other: &i8)

Performs the <<= operation.

impl ShlAssign<&i8> for u16

fn shl_assign(&mut self, other: &i8)

Performs the <<= operation.

impl ShlAssign<&i8> for u32

fn shl_assign(&mut self, other: &i8)

Performs the <<= operation.

impl ShlAssign<&i8> for u64

fn shl_assign(&mut self, other: &i8)

Performs the <<= operation.

impl ShlAssign<&i8> for u8

fn shl_assign(&mut self, other: &i8)

Performs the <<= operation.

impl ShlAssign<&i8> for usize

fn shl_assign(&mut self, other: &i8)

Performs the <<= operation.

impl ShlAssign<&isize> for i8

fn shl_assign(&mut self, other: &isize)

Performs the <<= operation.

impl ShlAssign<&u128> for i8

fn shl_assign(&mut self, other: &u128)

Performs the <<= operation.

impl ShlAssign<&u16> for i8

fn shl_assign(&mut self, other: &u16)

Performs the <<= operation.

impl ShlAssign<&u32> for i8

fn shl_assign(&mut self, other: &u32)

Performs the <<= operation.

impl ShlAssign<&u64> for i8

fn shl_assign(&mut self, other: &u64)

Performs the <<= operation.

impl ShlAssign<&u8> for i8

fn shl_assign(&mut self, other: &u8)

Performs the <<= operation.

impl ShlAssign<&usize> for i8

fn shl_assign(&mut self, other: &usize)

Performs the <<= operation.

impl ShlAssign<i128> for i8

fn shl_assign(&mut self, other: i128)

Performs the <<= operation.

impl ShlAssign<i16> for i8

fn shl_assign(&mut self, other: i16)

Performs the <<= operation.

impl ShlAssign<i32> for i8

fn shl_assign(&mut self, other: i32)

Performs the <<= operation.

impl ShlAssign<i64> for i8

fn shl_assign(&mut self, other: i64)

Performs the <<= operation.

impl ShlAssign<i8> for i128

fn shl_assign(&mut self, other: i8)

Performs the <<= operation.

impl ShlAssign<i8> for i16

fn shl_assign(&mut self, other: i8)

Performs the <<= operation.

impl ShlAssign<i8> for i32

fn shl_assign(&mut self, other: i8)

Performs the <<= operation.

impl ShlAssign<i8> for i64

fn shl_assign(&mut self, other: i8)

Performs the <<= operation.

impl ShlAssign<i8> for isize

fn shl_assign(&mut self, other: i8)

Performs the <<= operation.

impl ShlAssign<i8> for u128

fn shl_assign(&mut self, other: i8)

Performs the <<= operation.

impl ShlAssign<i8> for u16

fn shl_assign(&mut self, other: i8)

Performs the <<= operation.

impl ShlAssign<i8> for u32

fn shl_assign(&mut self, other: i8)

Performs the <<= operation.

impl ShlAssign<i8> for u64

fn shl_assign(&mut self, other: i8)

Performs the <<= operation.

impl ShlAssign<i8> for u8

fn shl_assign(&mut self, other: i8)

Performs the <<= operation.

impl ShlAssign<i8> for usize

fn shl_assign(&mut self, other: i8)

Performs the <<= operation.

impl ShlAssign<isize> for i8

fn shl_assign(&mut self, other: isize)

Performs the <<= operation.

impl ShlAssign<u128> for i8

fn shl_assign(&mut self, other: u128)

Performs the <<= operation.

impl ShlAssign<u16> for i8

fn shl_assign(&mut self, other: u16)

Performs the <<= operation.

impl ShlAssign<u32> for i8

fn shl_assign(&mut self, other: u32)

Performs the <<= operation.

impl ShlAssign<u64> for i8

fn shl_assign(&mut self, other: u64)

Performs the <<= operation.

impl ShlAssign<u8> for i8

fn shl_assign(&mut self, other: u8)

Performs the <<= operation.

impl ShlAssign<usize> for i8

fn shl_assign(&mut self, other: usize)

Performs the <<= operation.

impl ShlAssign for i8

fn shl_assign(&mut self, other: i8)

Performs the <<= operation.

impl Shr<&i128> for &i8

type Output = <i8 as Shr<i128>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &i128) -> <i8 as Shr<i128>>::Output

Performs the >> operation.

impl Shr<&i128> for i8

type Output = <i8 as Shr<i128>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &i128) -> <i8 as Shr<i128>>::Output

Performs the >> operation.

impl Shr<&i16> for &i8

type Output = <i8 as Shr<i16>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &i16) -> <i8 as Shr<i16>>::Output

Performs the >> operation.

impl Shr<&i16> for i8

type Output = <i8 as Shr<i16>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &i16) -> <i8 as Shr<i16>>::Output

Performs the >> operation.

impl Shr<&i32> for &i8

type Output = <i8 as Shr<i32>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &i32) -> <i8 as Shr<i32>>::Output

Performs the >> operation.

impl Shr<&i32> for i8

type Output = <i8 as Shr<i32>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &i32) -> <i8 as Shr<i32>>::Output

Performs the >> operation.

impl Shr<&i64> for &i8

type Output = <i8 as Shr<i64>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &i64) -> <i8 as Shr<i64>>::Output

Performs the >> operation.

impl Shr<&i64> for i8

type Output = <i8 as Shr<i64>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &i64) -> <i8 as Shr<i64>>::Output

Performs the >> operation.

impl Shr<&i8> for &i128

type Output = <i128 as Shr<i8>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &i8) -> <i128 as Shr<i8>>::Output

Performs the >> operation.

impl Shr<&i8> for &i16

type Output = <i16 as Shr<i8>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &i8) -> <i16 as Shr<i8>>::Output

Performs the >> operation.

impl Shr<&i8> for &i32

type Output = <i32 as Shr<i8>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &i8) -> <i32 as Shr<i8>>::Output

Performs the >> operation.

impl Shr<&i8> for &i64

type Output = <i64 as Shr<i8>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &i8) -> <i64 as Shr<i8>>::Output

Performs the >> operation.

impl Shr<&i8> for &i8

type Output = <i8 as Shr>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &i8) -> <i8 as Shr<i8>>::Output

Performs the >> operation.

impl Shr<&i8> for &isize

type Output = <isize as Shr<i8>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &i8) -> <isize as Shr<i8>>::Output

Performs the >> operation.

impl Shr<&i8> for &u128

type Output = <u128 as Shr<i8>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &i8) -> <u128 as Shr<i8>>::Output

Performs the >> operation.

impl Shr<&i8> for &u16

type Output = <u16 as Shr<i8>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &i8) -> <u16 as Shr<i8>>::Output

Performs the >> operation.

impl Shr<&i8> for &u32

type Output = <u32 as Shr<i8>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &i8) -> <u32 as Shr<i8>>::Output

Performs the >> operation.

impl Shr<&i8> for &u64

type Output = <u64 as Shr<i8>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &i8) -> <u64 as Shr<i8>>::Output

Performs the >> operation.

impl Shr<&i8> for &u8

type Output = <u8 as Shr<i8>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &i8) -> <u8 as Shr<i8>>::Output

Performs the >> operation.

impl Shr<&i8> for &usize

type Output = <usize as Shr<i8>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &i8) -> <usize as Shr<i8>>::Output

Performs the >> operation.

impl Shr<&i8> for i128

type Output = <i128 as Shr<i8>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &i8) -> <i128 as Shr<i8>>::Output

Performs the >> operation.

impl Shr<&i8> for i16

type Output = <i16 as Shr<i8>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &i8) -> <i16 as Shr<i8>>::Output

Performs the >> operation.

impl Shr<&i8> for i32

type Output = <i32 as Shr<i8>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &i8) -> <i32 as Shr<i8>>::Output

Performs the >> operation.

impl Shr<&i8> for i64

type Output = <i64 as Shr<i8>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &i8) -> <i64 as Shr<i8>>::Output

Performs the >> operation.

impl Shr<&i8> for i8

type Output = <i8 as Shr>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &i8) -> <i8 as Shr<i8>>::Output

Performs the >> operation.

impl Shr<&i8> for isize

type Output = <isize as Shr<i8>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &i8) -> <isize as Shr<i8>>::Output

Performs the >> operation.

impl Shr<&i8> for u128

type Output = <u128 as Shr<i8>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &i8) -> <u128 as Shr<i8>>::Output

Performs the >> operation.

impl Shr<&i8> for u16

type Output = <u16 as Shr<i8>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &i8) -> <u16 as Shr<i8>>::Output

Performs the >> operation.

impl Shr<&i8> for u32

type Output = <u32 as Shr<i8>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &i8) -> <u32 as Shr<i8>>::Output

Performs the >> operation.

impl Shr<&i8> for u64

type Output = <u64 as Shr<i8>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &i8) -> <u64 as Shr<i8>>::Output

Performs the >> operation.

impl Shr<&i8> for u8

type Output = <u8 as Shr<i8>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &i8) -> <u8 as Shr<i8>>::Output

Performs the >> operation.

impl Shr<&i8> for usize

type Output = <usize as Shr<i8>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &i8) -> <usize as Shr<i8>>::Output

Performs the >> operation.

impl Shr<&isize> for &i8

type Output = <i8 as Shr<isize>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &isize) -> <i8 as Shr<isize>>::Output

Performs the >> operation.

impl Shr<&isize> for i8

type Output = <i8 as Shr<isize>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &isize) -> <i8 as Shr<isize>>::Output

Performs the >> operation.

impl Shr<&u128> for &i8

type Output = <i8 as Shr<u128>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &u128) -> <i8 as Shr<u128>>::Output

Performs the >> operation.

impl Shr<&u128> for i8

type Output = <i8 as Shr<u128>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &u128) -> <i8 as Shr<u128>>::Output

Performs the >> operation.

impl Shr<&u16> for &i8

type Output = <i8 as Shr<u16>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &u16) -> <i8 as Shr<u16>>::Output

Performs the >> operation.

impl Shr<&u16> for i8

type Output = <i8 as Shr<u16>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &u16) -> <i8 as Shr<u16>>::Output

Performs the >> operation.

impl Shr<&u32> for &i8

type Output = <i8 as Shr<u32>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &u32) -> <i8 as Shr<u32>>::Output

Performs the >> operation.

impl Shr<&u32> for i8

type Output = <i8 as Shr<u32>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &u32) -> <i8 as Shr<u32>>::Output

Performs the >> operation.

impl Shr<&u64> for &i8

type Output = <i8 as Shr<u64>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &u64) -> <i8 as Shr<u64>>::Output

Performs the >> operation.

impl Shr<&u64> for i8

type Output = <i8 as Shr<u64>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &u64) -> <i8 as Shr<u64>>::Output

Performs the >> operation.

impl Shr<&u8> for &i8

type Output = <i8 as Shr<u8>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &u8) -> <i8 as Shr<u8>>::Output

Performs the >> operation.

impl Shr<&u8> for i8

type Output = <i8 as Shr<u8>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &u8) -> <i8 as Shr<u8>>::Output

Performs the >> operation.

impl Shr<&usize> for &i8

type Output = <i8 as Shr<usize>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &usize) -> <i8 as Shr<usize>>::Output

Performs the >> operation.

impl Shr<&usize> for i8

type Output = <i8 as Shr<usize>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: &usize) -> <i8 as Shr<usize>>::Output

Performs the >> operation.

impl Shr<i128> for &i8

type Output = <i8 as Shr<i128>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: i128) -> <i8 as Shr<i128>>::Output

Performs the >> operation.

impl Shr<i128> for i8

type Output = i8

The resulting type after applying the >> operator.

fn shr(self, other: i128) -> i8

Performs the >> operation.

impl Shr<i16> for &i8

type Output = <i8 as Shr<i16>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: i16) -> <i8 as Shr<i16>>::Output

Performs the >> operation.

impl Shr<i16> for i8

type Output = i8

The resulting type after applying the >> operator.

fn shr(self, other: i16) -> i8

Performs the >> operation.

impl Shr<i32> for &i8

type Output = <i8 as Shr<i32>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: i32) -> <i8 as Shr<i32>>::Output

Performs the >> operation.

impl Shr<i32> for i8

type Output = i8

The resulting type after applying the >> operator.

fn shr(self, other: i32) -> i8

Performs the >> operation.

impl Shr<i64> for &i8

type Output = <i8 as Shr<i64>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: i64) -> <i8 as Shr<i64>>::Output

Performs the >> operation.

impl Shr<i64> for i8

type Output = i8

The resulting type after applying the >> operator.

fn shr(self, other: i64) -> i8

Performs the >> operation.

impl Shr<i8> for &i128

type Output = <i128 as Shr<i8>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: i8) -> <i128 as Shr<i8>>::Output

Performs the >> operation.

impl Shr<i8> for &i16

type Output = <i16 as Shr<i8>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: i8) -> <i16 as Shr<i8>>::Output

Performs the >> operation.

impl Shr<i8> for &i32

type Output = <i32 as Shr<i8>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: i8) -> <i32 as Shr<i8>>::Output

Performs the >> operation.

impl Shr<i8> for &i64

type Output = <i64 as Shr<i8>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: i8) -> <i64 as Shr<i8>>::Output

Performs the >> operation.

impl Shr<i8> for &i8

type Output = <i8 as Shr>::Output

The resulting type after applying the >> operator.

fn shr(self, other: i8) -> <i8 as Shr<i8>>::Output

Performs the >> operation.

impl Shr<i8> for &isize

type Output = <isize as Shr<i8>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: i8) -> <isize as Shr<i8>>::Output

Performs the >> operation.

impl Shr<i8> for &u128

type Output = <u128 as Shr<i8>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: i8) -> <u128 as Shr<i8>>::Output

Performs the >> operation.

impl Shr<i8> for &u16

type Output = <u16 as Shr<i8>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: i8) -> <u16 as Shr<i8>>::Output

Performs the >> operation.

impl Shr<i8> for &u32

type Output = <u32 as Shr<i8>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: i8) -> <u32 as Shr<i8>>::Output

Performs the >> operation.

impl Shr<i8> for &u64

type Output = <u64 as Shr<i8>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: i8) -> <u64 as Shr<i8>>::Output

Performs the >> operation.

impl Shr<i8> for &u8

type Output = <u8 as Shr<i8>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: i8) -> <u8 as Shr<i8>>::Output

Performs the >> operation.

impl Shr<i8> for &usize

type Output = <usize as Shr<i8>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: i8) -> <usize as Shr<i8>>::Output

Performs the >> operation.

impl Shr<i8> for i128

type Output = i128

The resulting type after applying the >> operator.

fn shr(self, other: i8) -> i128

Performs the >> operation.

impl Shr<i8> for i16

type Output = i16

The resulting type after applying the >> operator.

fn shr(self, other: i8) -> i16

Performs the >> operation.

impl Shr<i8> for i32

type Output = i32

The resulting type after applying the >> operator.

fn shr(self, other: i8) -> i32

Performs the >> operation.

impl Shr<i8> for i64

type Output = i64

The resulting type after applying the >> operator.

fn shr(self, other: i8) -> i64

Performs the >> operation.

impl Shr<i8> for isize

type Output = isize

The resulting type after applying the >> operator.

fn shr(self, other: i8) -> isize

Performs the >> operation.

impl Shr<i8> for u128

type Output = u128

The resulting type after applying the >> operator.

fn shr(self, other: i8) -> u128

Performs the >> operation.

impl Shr<i8> for u16

type Output = u16

The resulting type after applying the >> operator.

fn shr(self, other: i8) -> u16

Performs the >> operation.

impl Shr<i8> for u32

type Output = u32

The resulting type after applying the >> operator.

fn shr(self, other: i8) -> u32

Performs the >> operation.

impl Shr<i8> for u64

type Output = u64

The resulting type after applying the >> operator.

fn shr(self, other: i8) -> u64

Performs the >> operation.

impl Shr<i8> for u8

type Output = u8

The resulting type after applying the >> operator.

fn shr(self, other: i8) -> u8

Performs the >> operation.

impl Shr<i8> for usize

type Output = usize

The resulting type after applying the >> operator.

fn shr(self, other: i8) -> usize

Performs the >> operation.

impl Shr<isize> for &i8

type Output = <i8 as Shr<isize>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: isize) -> <i8 as Shr<isize>>::Output

Performs the >> operation.

impl Shr<isize> for i8

type Output = i8

The resulting type after applying the >> operator.

fn shr(self, other: isize) -> i8

Performs the >> operation.

impl Shr<u128> for &i8

type Output = <i8 as Shr<u128>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: u128) -> <i8 as Shr<u128>>::Output

Performs the >> operation.

impl Shr<u128> for i8

type Output = i8

The resulting type after applying the >> operator.

fn shr(self, other: u128) -> i8

Performs the >> operation.

impl Shr<u16> for &i8

type Output = <i8 as Shr<u16>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: u16) -> <i8 as Shr<u16>>::Output

Performs the >> operation.

impl Shr<u16> for i8

type Output = i8

The resulting type after applying the >> operator.

fn shr(self, other: u16) -> i8

Performs the >> operation.

impl Shr<u32> for &i8

type Output = <i8 as Shr<u32>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: u32) -> <i8 as Shr<u32>>::Output

Performs the >> operation.

impl Shr<u32> for i8

type Output = i8

The resulting type after applying the >> operator.

fn shr(self, other: u32) -> i8

Performs the >> operation.

impl Shr<u64> for &i8

type Output = <i8 as Shr<u64>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: u64) -> <i8 as Shr<u64>>::Output

Performs the >> operation.

impl Shr<u64> for i8

type Output = i8

The resulting type after applying the >> operator.

fn shr(self, other: u64) -> i8

Performs the >> operation.

impl Shr<u8> for &i8

type Output = <i8 as Shr<u8>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: u8) -> <i8 as Shr<u8>>::Output

Performs the >> operation.

impl Shr<u8> for i8

type Output = i8

The resulting type after applying the >> operator.

fn shr(self, other: u8) -> i8

Performs the >> operation.

impl Shr<usize> for &i8

type Output = <i8 as Shr<usize>>::Output

The resulting type after applying the >> operator.

fn shr(self, other: usize) -> <i8 as Shr<usize>>::Output

Performs the >> operation.

impl Shr<usize> for i8

type Output = i8

The resulting type after applying the >> operator.

fn shr(self, other: usize) -> i8

Performs the >> operation.

impl Shr for i8

type Output = i8

The resulting type after applying the >> operator.

fn shr(self, other: i8) -> i8

Performs the >> operation.

impl ShrAssign<&i128> for i8

fn shr_assign(&mut self, other: &i128)

Performs the >>= operation.

impl ShrAssign<&i16> for i8

fn shr_assign(&mut self, other: &i16)

Performs the >>= operation.

impl ShrAssign<&i32> for i8

fn shr_assign(&mut self, other: &i32)

Performs the >>= operation.

impl ShrAssign<&i64> for i8

fn shr_assign(&mut self, other: &i64)

Performs the >>= operation.

impl ShrAssign<&i8> for i128

fn shr_assign(&mut self, other: &i8)

Performs the >>= operation.

impl ShrAssign<&i8> for i16

fn shr_assign(&mut self, other: &i8)

Performs the >>= operation.

impl ShrAssign<&i8> for i32

fn shr_assign(&mut self, other: &i8)

Performs the >>= operation.

impl ShrAssign<&i8> for i64

fn shr_assign(&mut self, other: &i8)

Performs the >>= operation.

impl ShrAssign<&i8> for i8

fn shr_assign(&mut self, other: &i8)

Performs the >>= operation.

impl ShrAssign<&i8> for isize

fn shr_assign(&mut self, other: &i8)

Performs the >>= operation.

impl ShrAssign<&i8> for u128

fn shr_assign(&mut self, other: &i8)

Performs the >>= operation.

impl ShrAssign<&i8> for u16

fn shr_assign(&mut self, other: &i8)

Performs the >>= operation.

impl ShrAssign<&i8> for u32

fn shr_assign(&mut self, other: &i8)

Performs the >>= operation.

impl ShrAssign<&i8> for u64

fn shr_assign(&mut self, other: &i8)

Performs the >>= operation.

impl ShrAssign<&i8> for u8

fn shr_assign(&mut self, other: &i8)

Performs the >>= operation.

impl ShrAssign<&i8> for usize

fn shr_assign(&mut self, other: &i8)

Performs the >>= operation.

impl ShrAssign<&isize> for i8

fn shr_assign(&mut self, other: &isize)

Performs the >>= operation.

impl ShrAssign<&u128> for i8

fn shr_assign(&mut self, other: &u128)

Performs the >>= operation.

impl ShrAssign<&u16> for i8

fn shr_assign(&mut self, other: &u16)

Performs the >>= operation.

impl ShrAssign<&u32> for i8

fn shr_assign(&mut self, other: &u32)

Performs the >>= operation.

impl ShrAssign<&u64> for i8

fn shr_assign(&mut self, other: &u64)

Performs the >>= operation.

impl ShrAssign<&u8> for i8

fn shr_assign(&mut self, other: &u8)

Performs the >>= operation.

impl ShrAssign<&usize> for i8

fn shr_assign(&mut self, other: &usize)

Performs the >>= operation.

impl ShrAssign<i128> for i8

fn shr_assign(&mut self, other: i128)

Performs the >>= operation.

impl ShrAssign<i16> for i8

fn shr_assign(&mut self, other: i16)

Performs the >>= operation.

impl ShrAssign<i32> for i8

fn shr_assign(&mut self, other: i32)

Performs the >>= operation.

impl ShrAssign<i64> for i8

fn shr_assign(&mut self, other: i64)

Performs the >>= operation.

impl ShrAssign<i8> for i128

fn shr_assign(&mut self, other: i8)

Performs the >>= operation.

impl ShrAssign<i8> for i16

fn shr_assign(&mut self, other: i8)

Performs the >>= operation.

impl ShrAssign<i8> for i32

fn shr_assign(&mut self, other: i8)

Performs the >>= operation.

impl ShrAssign<i8> for i64

fn shr_assign(&mut self, other: i8)

Performs the >>= operation.

impl ShrAssign<i8> for isize

fn shr_assign(&mut self, other: i8)

Performs the >>= operation.

impl ShrAssign<i8> for u128

fn shr_assign(&mut self, other: i8)

Performs the >>= operation.

impl ShrAssign<i8> for u16

fn shr_assign(&mut self, other: i8)

Performs the >>= operation.

impl ShrAssign<i8> for u32

fn shr_assign(&mut self, other: i8)

Performs the >>= operation.

impl ShrAssign<i8> for u64

fn shr_assign(&mut self, other: i8)

Performs the >>= operation.

impl ShrAssign<i8> for u8

fn shr_assign(&mut self, other: i8)

Performs the >>= operation.

impl ShrAssign<i8> for usize

fn shr_assign(&mut self, other: i8)

Performs the >>= operation.

impl ShrAssign<isize> for i8

fn shr_assign(&mut self, other: isize)

Performs the >>= operation.

impl ShrAssign<u128> for i8

fn shr_assign(&mut self, other: u128)

Performs the >>= operation.

impl ShrAssign<u16> for i8

fn shr_assign(&mut self, other: u16)

Performs the >>= operation.

impl ShrAssign<u32> for i8

fn shr_assign(&mut self, other: u32)

Performs the >>= operation.

impl ShrAssign<u64> for i8

fn shr_assign(&mut self, other: u64)

Performs the >>= operation.

impl ShrAssign<u8> for i8

fn shr_assign(&mut self, other: u8)

Performs the >>= operation.

impl ShrAssign<usize> for i8

fn shr_assign(&mut self, other: usize)

Performs the >>= operation.

impl ShrAssign for i8

fn shr_assign(&mut self, other: i8)

Performs the >>= operation.

impl Sub<&i8> for &i8

type Output = <i8 as Sub>::Output

The resulting type after applying the - operator.

fn sub(self, other: &i8) -> <i8 as Sub<i8>>::Output

Performs the - operation.

impl Sub<&i8> for i8

type Output = <i8 as Sub>::Output

The resulting type after applying the - operator.

fn sub(self, other: &i8) -> <i8 as Sub<i8>>::Output

Performs the - operation.

impl Sub<i8> for &i8

type Output = <i8 as Sub>::Output

The resulting type after applying the - operator.

fn sub(self, other: i8) -> <i8 as Sub<i8>>::Output

Performs the - operation.

impl Sub for i8

type Output = i8

The resulting type after applying the - operator.

fn sub(self, other: i8) -> i8

Performs the - operation.

impl SubAssign<&i8> for i8

fn sub_assign(&mut self, other: &i8)

Performs the -= operation.

impl SubAssign for i8

fn sub_assign(&mut self, other: i8)

Performs the -= operation.

impl ConstParamTy_ for i8

impl Copy for i8

impl Eq for i8

impl StructuralPartialEq for i8