The Rust Programming Language

A Closer Look at the Traits for Async

Throughout the chapter, we’ve used the Future, Stream, and StreamExt traits in various ways. So far, though, we’ve avoided getting too far into the details of how they work or how they fit together, which is fine most of the time for your day-to-day Rust work. Sometimes, though, you’ll encounter situations where you’ll need to understand a few more of these traits’ details, along with the Pin type and the Unpin trait. In this section, we’ll dig in just enough to help in those scenarios, still leaving the really deep dive for other documentation.

The Future Trait

Let’s start by taking a closer look at how the Future trait works. Here’s how Rust defines it:

#![allow(unused)]
fn main() {
use std::pin::Pin;
use std::task::{Context, Poll};

pub trait Future {
    type Output;

    fn poll(self: Pin<&mut Self>, cx: &mut Context<'_>) -> Poll<Self::Output>;
}
}

That trait definition includes a bunch of new types and also some syntax we haven’t seen before, so let’s walk through the definition piece by piece.

First, Future’s associated type Output says what the future resolves to. This is analogous to the Item associated type for the Iterator trait. Second, Future has the poll method, which takes a special Pin reference for its self parameter and a mutable reference to a Context type, and returns a Poll<Self::Output>. We’ll talk more about Pin and Context in a moment. For now, let’s focus on what the method returns, the Poll type:

#![allow(unused)]
fn main() {
pub enum Poll<T> {
    Ready(T),
    Pending,
}
}

This Poll type is similar to an Option. It has one variant that has a value, Ready(T), and one that does not, Pending. Poll means something quite different from Option, though! The Pending variant indicates that the future still has work to do, so the caller will need to check again later. The Ready variant indicates that the Future has finished its work and the T value is available.

When you see code that uses await, Rust compiles it under the hood to code that calls poll. If you look back at Listing 17-4, where we printed out the page title for a single URL once it resolved, Rust compiles it into something kind of (although not exactly) like this:

match page_title(url).poll() {
    Ready(page_title) => match page_title {
        Some(title) => println!("The title for {url} was {title}"),
        None => println!("{url} had no title"),
    }
    Pending => {
        // But what goes here?
    }
}

What should we do when the future is still Pending? We need some way to try again, and again, and again, until the future is finally ready. In other words, we need a loop:

let mut page_title_fut = page_title(url);
loop {
    match page_title_fut.poll() {
        Ready(value) => match page_title {
            Some(title) => println!("The title for {url} was {title}"),
            None => println!("{url} had no title"),
        }
        Pending => {
            // continue
        }
    }
}

If Rust compiled it to exactly that code, though, every await would be blocking—exactly the opposite of what we were going for! Instead, Rust ensures that the loop can hand off control to something that can pause work on this future to work on other futures and then check this one again later. As we’ve seen, that something is an async runtime, and this scheduling and coordination work is one of its main jobs.

In the “Sending Data Between Two Tasks Using Message Passing” section, we described waiting on rx.recv. The recv call returns a future, and awaiting the future polls it. We noted that a runtime will pause the future until it’s ready with either Some(message) or None when the channel closes. With our deeper understanding of the Future trait, and specifically Future::poll, we can see how that works. The runtime knows the future isn’t ready when it returns Poll::Pending. Conversely, the runtime knows the future is ready and advances it when poll returns Poll::Ready(Some(message)) or Poll::Ready(None).

The exact details of how a runtime does that are beyond the scope of this book, but the key is to see the basic mechanics of futures: a runtime polls each future it is responsible for, putting the future back to sleep when it is not yet ready.

The Pin Type and the Unpin Trait

Back in Listing 17-13, we used the trpl::join! macro to await three futures. However, it’s common to have a collection such as a vector containing some number futures that won’t be known until runtime. Let’s change Listing 17-13 to the code in Listing 17-23 that puts the three futures into a vector and calls the trpl::join_all function instead, which won’t compile yet.

extern crate trpl; // required for mdbook test

use std::time::Duration;

fn main() {
    trpl::block_on(async {
        let (tx, mut rx) = trpl::channel();

        let tx1 = tx.clone();
        let tx1_fut = async move {
            let vals = vec![
                String::from("hi"),
                String::from("from"),
                String::from("the"),
                String::from("future"),
            ];

            for val in vals {
                tx1.send(val).unwrap();
                trpl::sleep(Duration::from_secs(1)).await;
            }
        };

        let rx_fut = async {
            while let Some(value) = rx.recv().await {
                println!("received '{value}'");
            }
        };

        let tx_fut = async move {
            // --snip--
            let vals = vec![
                String::from("more"),
                String::from("messages"),
                String::from("for"),
                String::from("you"),
            ];

            for val in vals {
                tx.send(val).unwrap();
                trpl::sleep(Duration::from_secs(1)).await;
            }
        };

        let futures: Vec<Box<dyn Future<Output = ()>>> =
            vec![Box::new(tx1_fut), Box::new(rx_fut), Box::new(tx_fut)];

        trpl::join_all(futures).await;
    });
}

We put each future within a Box to make them into trait objects, just as we did in the “Returning Errors from run” section in Chapter 12. (We’ll cover trait objects in detail in Chapter 18.) Using trait objects lets us treat each of the anonymous futures produced by these types as the same type, because all of them implement the Future trait.

This might be surprising. After all, none of the async blocks returns anything, so each one produces a Future<Output = ()>. Remember that Future is a trait, though, and that the compiler creates a unique enum for each async block, even when they have identical output types. Just as you can’t put two different handwritten structs in a Vec, you can’t mix compiler-generated enums.

Then we pass the collection of futures to the trpl::join_all function and await the result. However, this doesn’t compile; here’s the relevant part of the error messages.

error[E0277]: `dyn Future<Output = ()>` cannot be unpinned
  --> src/main.rs:48:33
   |
48 |         trpl::join_all(futures).await;
   |                                 ^^^^^ the trait `Unpin` is not implemented for `dyn Future<Output = ()>`
   |
   = note: consider using the `pin!` macro
           consider using `Box::pin` if you need to access the pinned value outside of the current scope
   = note: required for `Box<dyn Future<Output = ()>>` to implement `Future`
note: required by a bound in `futures_util::future::join_all::JoinAll`
  --> file:///home/.cargo/registry/src/index.crates.io-1949cf8c6b5b557f/futures-util-0.3.30/src/future/join_all.rs:29:8
   |
27 | pub struct JoinAll<F>
   |            ------- required by a bound in this struct
28 | where
29 |     F: Future,
   |        ^^^^^^ required by this bound in `JoinAll`

The note in this error message tells us that we should use the pin! macro to pin the values, which means putting them inside the Pin type that guarantees the values won’t be moved in memory. The error message says pinning is required because dyn Future<Output = ()> needs to implement the Unpin trait and it currently does not.

The trpl::join_all function returns a struct called JoinAll. That struct is generic over a type F, which is constrained to implement the Future trait. Directly awaiting a future with await pins the future implicitly. That’s why we don’t need to use pin! everywhere we want to await futures.

However, we’re not directly awaiting a future here. Instead, we construct a new future, JoinAll, by passing a collection of futures to the join_all function. The signature for join_all requires that the types of the items in the collection all implement the Future trait, and Box<T> implements Future only if the T it wraps is a future that implements the Unpin trait.

That’s a lot to absorb! To really understand it, let’s dive a little further into how the Future trait actually works, in particular around pinning. Look again at the definition of the Future trait:

#![allow(unused)]
fn main() {
use std::pin::Pin;
use std::task::{Context, Poll};

pub trait Future {
    type Output;

    // Required method
    fn poll(self: Pin<&mut Self>, cx: &mut Context<'_>) -> Poll<Self::Output>;
}
}

The cx parameter and its Context type are the key to how a runtime actually knows when to check any given future while still being lazy. Again, the details of how that works are beyond the scope of this chapter, and you generally only need to think about this when writing a custom Future implementation. We’ll focus instead on the type for self, as this is the first time we’ve seen a method where self has a type annotation. A type annotation for self works like type annotations for other function parameters but with two key differences:

• It tells Rust what type self must be for the method to be called.
• It can’t be just any type. It’s restricted to the type on which the method is implemented, a reference or smart pointer to that type, or a Pin wrapping a reference to that type.

We’ll see more on this syntax in Chapter 18. For now, it’s enough to know that if we want to poll a future to check whether it is Pending or Ready(Output), we need a Pin-wrapped mutable reference to the type.

Pin is a wrapper for pointer-like types such as &, &mut, Box, and Rc. (Technically, Pin works with types that implement the Deref or DerefMut traits, but this is effectively equivalent to working only with references and smart pointers.) Pin is not a pointer itself and doesn’t have any behavior of its own like Rc and Arc do with reference counting; it’s purely a tool the compiler can use to enforce constraints on pointer usage.

Recalling that await is implemented in terms of calls to poll starts to explain the error message we saw earlier, but that was in terms of Unpin, not Pin. So how exactly does Pin relate to Unpin, and why does Future need self to be in a Pin type to call poll?

Remember from earlier in this chapter that a series of await points in a future get compiled into a state machine, and the compiler makes sure that state machine follows all of Rust’s normal rules around safety, including borrowing and ownership. To make that work, Rust looks at what data is needed between one await point and either the next await point or the end of the async block. It then creates a corresponding variant in the compiled state machine. Each variant gets the access it needs to the data that will be used in that section of the source code, whether by taking ownership of that data or by getting a mutable or immutable reference to it.

So far, so good: if we get anything wrong about the ownership or references in a given async block, the borrow checker will tell us. When we want to move around the future that corresponds to that block—like moving it into a Vec to pass to join_all—things get trickier.

When we move a future—whether by pushing it into a data structure to use as an iterator with join_all or by returning it from a function—that actually means moving the state machine Rust creates for us. And unlike most other types in Rust, the futures Rust creates for async blocks can end up with references to themselves in the fields of any given variant, as shown in the simplified illustration in Figure 17-4.

By default, though, any object that has a reference to itself is unsafe to move, because references always point to the actual memory address of whatever they refer to (see Figure 17-5). If you move the data structure itself, those internal references will be left pointing to the old location. However, that memory location is now invalid. For one thing, its value will not be updated when you make changes to the data structure. For another—more important—thing, the computer is now free to reuse that memory for other purposes! You could end up reading completely unrelated data later.

Theoretically, the Rust compiler could try to update every reference to an object whenever it gets moved, but that could add a lot of performance overhead, especially if a whole web of references needs updating. If we could instead make sure the data structure in question doesn’t move in memory, we wouldn’t have to update any references. This is exactly what Rust’s borrow checker is for: in safe code, it prevents you from moving any item with an active reference to it.

Pin builds on that to give us the exact guarantee we need. When we pin a value by wrapping a pointer to that value in Pin, it can no longer move. Thus, if you have Pin<Box<SomeType>>, you actually pin the SomeType value, not the Box pointer. Figure 17-6 illustrates this process.

In fact, the Box pointer can still move around freely. Remember: we care about making sure the data ultimately being referenced stays in place. If a pointer moves around, but the data it points to is in the same place, as in Figure 17-7, there’s no potential problem. (As an independent exercise, look at the docs for the types as well as the std::pin module and try to work out how you’d do this with a Pin wrapping a Box.) The key is that the self-referential type itself cannot move, because it is still pinned.

However, most types are perfectly safe to move around, even if they happen to be behind a Pin pointer. We only need to think about pinning when items have internal references. Primitive values such as numbers and Booleans are safe because they obviously don’t have any internal references. Neither do most types you normally work with in Rust. You can move around a Vec, for example, without worrying. Given what we have seen so far, if you have a Pin<Vec<String>>, you’d have to do everything via the safe but restrictive APIs provided by Pin, even though a Vec<String> is always safe to move if there are no other references to it. We need a way to tell the compiler that it’s fine to move items around in cases like this—and that’s where Unpin comes into play.

Unpin is a marker trait, similar to the Send and Sync traits we saw in Chapter 16, and thus has no functionality of its own. Marker traits exist only to tell the compiler it’s safe to use the type implementing a given trait in a particular context. Unpin informs the compiler that a given type does not need to uphold any guarantees about whether the value in question can be safely moved.

Just as with Send and Sync, the compiler implements Unpin automatically for all types where it can prove it is safe. A special case, again similar to Send and Sync, is where Unpin is not implemented for a type. The notation for this is impl !Unpin for SomeType, where SomeType is the name of a type that does need to uphold those guarantees to be safe whenever a pointer to that type is used in a Pin.

In other words, there are two things to keep in mind about the relationship between Pin and Unpin. First, Unpin is the “normal” case, and !Unpin is the special case. Second, whether a type implements Unpin or !Unpin only matters when you’re using a pinned pointer to that type like Pin<&mut SomeType>.

To make that concrete, think about a String: it has a length and the Unicode characters that make it up. We can wrap a String in Pin, as seen in Figure 17-8. However, String automatically implements Unpin, as do most other types in Rust.

As a result, we can do things that would be illegal if String implemented !Unpin instead, such as replacing one string with another at the exact same location in memory as in Figure 17-9. This doesn’t violate the Pin contract, because String has no internal references that make it unsafe to move around. That is precisely why it implements Unpin rather than !Unpin.

Now we know enough to understand the errors reported for that join_all call from back in Listing 17-23. We originally tried to move the futures produced by async blocks into a Vec<Box<dyn Future<Output = ()>>>, but as we’ve seen, those futures may have internal references, so they don’t automatically implement Unpin. Once we pin them, we can pass the resulting Pin type into the Vec, confident that the underlying data in the futures will not be moved. Listing 17-24 shows how to fix the code by calling the pin! macro where each of the three futures are defined and adjusting the trait object type.

extern crate trpl; // required for mdbook test

use std::pin::{Pin, pin};

// --snip--

use std::time::Duration;

fn main() {
    trpl::block_on(async {
        let (tx, mut rx) = trpl::channel();

        let tx1 = tx.clone();
        let tx1_fut = pin!(async move {
            // --snip--
            let vals = vec![
                String::from("hi"),
                String::from("from"),
                String::from("the"),
                String::from("future"),
            ];

            for val in vals {
                tx1.send(val).unwrap();
                trpl::sleep(Duration::from_secs(1)).await;
            }
        });

        let rx_fut = pin!(async {
            // --snip--
            while let Some(value) = rx.recv().await {
                println!("received '{value}'");
            }
        });

        let tx_fut = pin!(async move {
            // --snip--
            let vals = vec![
                String::from("more"),
                String::from("messages"),
                String::from("for"),
                String::from("you"),
            ];

            for val in vals {
                tx.send(val).unwrap();
                trpl::sleep(Duration::from_secs(1)).await;
            }
        });

        let futures: Vec<Pin<&mut dyn Future<Output = ()>>> =
            vec![tx1_fut, rx_fut, tx_fut];

        trpl::join_all(futures).await;
    });
}

This example now compiles and runs, and we could add or remove futures from the vector at runtime and join them all.

Pin and Unpin are mostly important for building lower-level libraries, or when you’re building a runtime itself, rather than for day-to-day Rust code. When you see these traits in error messages, though, now you’ll have a better idea of how to fix your code!

The Stream Trait

Now that you have a deeper grasp on the Future, Pin, and Unpin traits, we can turn our attention to the Stream trait. As you learned earlier in the chapter, streams are similar to asynchronous iterators. Unlike Iterator and Future, however, Stream has no definition in the standard library as of this writing, but there is a very common definition from the futures crate used throughout the ecosystem.

Let’s review the definitions of the Iterator and Future traits before looking at how a Stream trait might merge them together. From Iterator, we have the idea of a sequence: its next method provides an Option<Self::Item>. From Future, we have the idea of readiness over time: its poll method provides a Poll<Self::Output>. To represent a sequence of items that become ready over time, we define a Stream trait that puts those features together:

#![allow(unused)]
fn main() {
use std::pin::Pin;
use std::task::{Context, Poll};

trait Stream {
    type Item;

    fn poll_next(
        self: Pin<&mut Self>,
        cx: &mut Context<'_>
    ) -> Poll<Option<Self::Item>>;
}
}

The Stream trait defines an associated type called Item for the type of the items produced by the stream. This is similar to Iterator, where there may be zero to many items, and unlike Future, where there is always a single Output, even if it’s the unit type ().

Stream also defines a method to get those items. We call it poll_next, to make it clear that it polls in the same way Future::poll does and produces a sequence of items in the same way Iterator::next does. Its return type combines Poll with Option. The outer type is Poll, because it has to be checked for readiness, just as a future does. The inner type is Option, because it needs to signal whether there are more messages, just as an iterator does.

Something very similar to this definition will likely end up as part of Rust’s standard library. In the meantime, it’s part of the toolkit of most runtimes, so you can rely on it, and everything we cover next should generally apply!

In the examples we saw in the “Streams: Futures in Sequence” section, though, we didn’t use poll_next or Stream, but instead used next and StreamExt. We could work directly in terms of the poll_next API by hand-writing our own Stream state machines, of course, just as we could work with futures directly via their poll method. Using await is much nicer, though, and the StreamExt trait supplies the next method so we can do just that:

#![allow(unused)]
fn main() {
use std::pin::Pin;
use std::task::{Context, Poll};

trait Stream {
    type Item;
    fn poll_next(
        self: Pin<&mut Self>,
        cx: &mut Context<'_>,
    ) -> Poll<Option<Self::Item>>;
}

trait StreamExt: Stream {
    async fn next(&mut self) -> Option<Self::Item>
    where
        Self: Unpin;

    // other methods...
}
}

fn next(&mut self) -> Next<'_, Self> where Self: Unpin;

The StreamExt trait is also the home of all the interesting methods available to use with streams. StreamExt is automatically implemented for every type that implements Stream, but these traits are defined separately to enable the community to iterate on convenience APIs without affecting the foundational trait.

In the version of StreamExt used in the trpl crate, the trait not only defines the next method but also supplies a default implementation of next that correctly handles the details of calling Stream::poll_next. This means that even when you need to write your own streaming data type, you only have to implement Stream, and then anyone who uses your data type can use StreamExt and its methods with it automatically.

That’s all we’re going to cover for the lower-level details on these traits. To wrap up, let’s consider how futures (including streams), tasks, and threads all fit together!