The Rust Programming Language

Unsafe Rust

All the code we’ve discussed so far has had Rust’s memory safety guarantees enforced at compile time. However, Rust has a second language hidden inside it that doesn’t enforce these memory safety guarantees: it’s called unsafe Rust and works just like regular Rust, but gives us extra superpowers.

Unsafe Rust exists because, by nature, static analysis is conservative. When the compiler tries to determine whether or not code upholds the guarantees, it’s better for it to reject some valid programs than to accept some invalid programs. Although the code might be okay, if the Rust compiler doesn’t have enough information to be confident, it will reject the code. In these cases, you can use unsafe code to tell the compiler, “Trust me, I know what I’m doing.” Be warned, however, that you use unsafe Rust at your own risk: if you use unsafe code incorrectly, problems can occur due to memory unsafety, such as null pointer dereferencing.

Another reason Rust has an unsafe alter ego is that the underlying computer hardware is inherently unsafe. If Rust didn’t let you do unsafe operations, you couldn’t do certain tasks. Rust needs to allow you to do low-level systems programming, such as directly interacting with the operating system or even writing your own operating system. Working with low-level systems programming is one of the goals of the language. Let’s explore what we can do with unsafe Rust and how to do it.

Unsafe Superpowers

To switch to unsafe Rust, use the unsafe keyword and then start a new block that holds the unsafe code. You can take five actions in unsafe Rust that you can’t in safe Rust, which we call unsafe superpowers. Those superpowers include the ability to:

• Dereference a raw pointer
• Call an unsafe function or method
• Access or modify a mutable static variable
• Implement an unsafe trait
• Access fields of a union

It’s important to understand that unsafe doesn’t turn off the borrow checker or disable any other of Rust’s safety checks: if you use a reference in unsafe code, it will still be checked. The unsafe keyword only gives you access to these five features that are then not checked by the compiler for memory safety. You’ll still get some degree of safety inside of an unsafe block.

In addition, unsafe does not mean the code inside the block is necessarily dangerous or that it will definitely have memory safety problems: the intent is that as the programmer, you’ll ensure the code inside an unsafe block will access memory in a valid way.

People are fallible, and mistakes will happen, but by requiring these five unsafe operations to be inside blocks annotated with unsafe you’ll know that any errors related to memory safety must be within an unsafe block. Keep unsafe blocks small; you’ll be thankful later when you investigate memory bugs.

To isolate unsafe code as much as possible, it’s best to enclose unsafe code within a safe abstraction and provide a safe API, which we’ll discuss later in the chapter when we examine unsafe functions and methods. Parts of the standard library are implemented as safe abstractions over unsafe code that has been audited. Wrapping unsafe code in a safe abstraction prevents uses of unsafe from leaking out into all the places that you or your users might want to use the functionality implemented with unsafe code, because using a safe abstraction is safe.

Let’s look at each of the five unsafe superpowers in turn. We’ll also look at some abstractions that provide a safe interface to unsafe code.

Dereferencing a Raw Pointer

In Chapter 4, in the “Dangling References” section, we mentioned that the compiler ensures references are always valid. Unsafe Rust has two new types called raw pointers that are similar to references. As with references, raw pointers can be immutable or mutable and are written as *const T and *mut T, respectively. The asterisk isn’t the dereference operator; it’s part of the type name. In the context of raw pointers, immutable means that the pointer can’t be directly assigned to after being dereferenced.

Different from references and smart pointers, raw pointers:

• Are allowed to ignore the borrowing rules by having both immutable and mutable pointers or multiple mutable pointers to the same location
• Aren’t guaranteed to point to valid memory
• Are allowed to be null
• Don’t implement any automatic cleanup

By opting out of having Rust enforce these guarantees, you can give up guaranteed safety in exchange for greater performance or the ability to interface with another language or hardware where Rust’s guarantees don’t apply.

Listing 20-1 shows how to create an immutable and a mutable raw pointer.

fn main() {
    let mut num = 5;

    let r1 = &raw const num;
    let r2 = &raw mut num;
}

Notice that we don’t include the unsafe keyword in this code. We can create raw pointers in safe code; we just can’t dereference raw pointers outside an unsafe block, as you’ll see in a bit.

We’ve created raw pointers by using the raw borrow operators: &raw const num creates a *const i32 immutable raw pointer, and &raw mut num creates a *mut i32 mutable raw pointer. Because we created them directly from a local variable, we know these particular raw pointers are valid, but we can’t make that assumption about just any raw pointer.

To demonstrate this, next we’ll create a raw pointer whose validity we can’t be so certain of, using as to cast a value instead of using the raw reference operators. Listing 20-2 shows how to create a raw pointer to an arbitrary location in memory. Trying to use arbitrary memory is undefined: there might be data at that address or there might not, the compiler might optimize the code so there is no memory access, or the program might error with a segmentation fault. Usually, there is no good reason to write code like this, especially in cases where you can use a raw borrow operator instead, but it is possible.

fn main() {
    let address = 0x012345usize;
    let r = address as *const i32;
}

Recall that we can create raw pointers in safe code, but we can’t dereference raw pointers and read the data being pointed to. In Listing 20-3, we use the dereference operator * on a raw pointer that requires an unsafe block.

fn main() {
    let mut num = 5;

    let r1 = &raw const num;
    let r2 = &raw mut num;

    unsafe {
        println!("r1 is: {}", *r1);
        println!("r2 is: {}", *r2);
    }
}

Creating a pointer does no harm; it’s only when we try to access the value that it points at that we might end up dealing with an invalid value.

Note also that in Listing 20-1 and 20-3, we created *const i32 and *mut i32 raw pointers that both pointed to the same memory location, where num is stored. If we instead tried to create an immutable and a mutable reference to num, the code would not have compiled because Rust’s ownership rules don’t allow a mutable reference at the same time as any immutable references. With raw pointers, we can create a mutable pointer and an immutable pointer to the same location and change data through the mutable pointer, potentially creating a data race. Be careful!

With all of these dangers, why would you ever use raw pointers? One major use case is when interfacing with C code, as you’ll see in the next section, “Calling an Unsafe Function or Method.” Another case is when building up safe abstractions that the borrow checker doesn’t understand. We’ll introduce unsafe functions and then look at an example of a safe abstraction that uses unsafe code.

Calling an Unsafe Function or Method

The second type of operation you can perform in an unsafe block is calling unsafe functions. Unsafe functions and methods look exactly like regular functions and methods, but they have an extra unsafe before the rest of the definition. The unsafe keyword in this context indicates the function has requirements we need to uphold when we call this function, because Rust can’t guarantee we’ve met these requirements. By calling an unsafe function within an unsafe block, we’re saying that we’ve read this function’s documentation and take responsibility for upholding the function’s contracts.

Here is an unsafe function named dangerous that doesn’t do anything in its body:

fn main() {
    unsafe fn dangerous() {}

    unsafe {
        dangerous();
    }
}

We must call the dangerous function within a separate unsafe block. If we try to call dangerous without the unsafe block, we’ll get an error:

$ cargo run
   Compiling unsafe-example v0.1.0 (file:///projects/unsafe-example)
error[E0133]: call to unsafe function `dangerous` is unsafe and requires unsafe function or block
 --> src/main.rs:4:5
  |
4 |     dangerous();
  |     ^^^^^^^^^^^ call to unsafe function
  |
  = note: consult the function's documentation for information on how to avoid undefined behavior

For more information about this error, try `rustc --explain E0133`.
error: could not compile `unsafe-example` (bin "unsafe-example") due to 1 previous error

With the unsafe block, we’re asserting to Rust that we’ve read the function’s documentation, we understand how to use it properly, and we’ve verified that we’re fulfilling the contract of the function.

Bodies of unsafe functions are effectively unsafe blocks, so to perform other unsafe operations within an unsafe function, we don’t need to add another unsafe block.

Creating a Safe Abstraction over Unsafe Code

Just because a function contains unsafe code doesn’t mean we need to mark the entire function as unsafe. In fact, wrapping unsafe code in a safe function is a common abstraction. As an example, let’s study the split_at_mut function from the standard library, which requires some unsafe code. We’ll explore how we might implement it. This safe method is defined on mutable slices: it takes one slice and makes it two by splitting the slice at the index given as an argument. Listing 20-4 shows how to use split_at_mut.

fn main() {
    let mut v = vec![1, 2, 3, 4, 5, 6];

    let r = &mut v[..];

    let (a, b) = r.split_at_mut(3);

    assert_eq!(a, &mut [1, 2, 3]);
    assert_eq!(b, &mut [4, 5, 6]);
}

We can’t implement this function using only safe Rust. An attempt might look something like Listing 20-5, which won’t compile. For simplicity, we’ll implement split_at_mut as a function rather than a method and only for slices of i32 values rather than for a generic type T.

fn split_at_mut(values: &mut [i32], mid: usize) -> (&mut [i32], &mut [i32]) {
    let len = values.len();

    assert!(mid <= len);

    (&mut values[..mid], &mut values[mid..])
}

fn main() {
    let mut vector = vec![1, 2, 3, 4, 5, 6];
    let (left, right) = split_at_mut(&mut vector, 3);
}

This function first gets the total length of the slice. Then it asserts that the index given as a parameter is within the slice by checking whether it’s less than or equal to the length. The assertion means that if we pass an index that is greater than the length to split the slice at, the function will panic before it attempts to use that index.

Then we return two mutable slices in a tuple: one from the start of the original slice to the mid index and another from mid to the end of the slice.

When we try to compile the code in Listing 20-5, we’ll get an error.

$ cargo run
   Compiling unsafe-example v0.1.0 (file:///projects/unsafe-example)
error[E0499]: cannot borrow `*values` as mutable more than once at a time
 --> src/main.rs:6:31
  |
1 | fn split_at_mut(values: &mut [i32], mid: usize) -> (&mut [i32], &mut [i32]) {
  |                         - let's call the lifetime of this reference `'1`
...
6 |     (&mut values[..mid], &mut values[mid..])
  |     --------------------------^^^^^^--------
  |     |     |                   |
  |     |     |                   second mutable borrow occurs here
  |     |     first mutable borrow occurs here
  |     returning this value requires that `*values` is borrowed for `'1`
  |
  = help: use `.split_at_mut(position)` to obtain two mutable non-overlapping sub-slices

For more information about this error, try `rustc --explain E0499`.
error: could not compile `unsafe-example` (bin "unsafe-example") due to 1 previous error

Rust’s borrow checker can’t understand that we’re borrowing different parts of the slice; it only knows that we’re borrowing from the same slice twice. Borrowing different parts of a slice is fundamentally okay because the two slices aren’t overlapping, but Rust isn’t smart enough to know this. When we know code is okay, but Rust doesn’t, it’s time to reach for unsafe code.

Listing 20-6 shows how to use an unsafe block, a raw pointer, and some calls to unsafe functions to make the implementation of split_at_mut work.

use std::slice;

fn split_at_mut(values: &mut [i32], mid: usize) -> (&mut [i32], &mut [i32]) {
    let len = values.len();
    let ptr = values.as_mut_ptr();

    assert!(mid <= len);

    unsafe {
        (
            slice::from_raw_parts_mut(ptr, mid),
            slice::from_raw_parts_mut(ptr.add(mid), len - mid),
        )
    }
}

fn main() {
    let mut vector = vec![1, 2, 3, 4, 5, 6];
    let (left, right) = split_at_mut(&mut vector, 3);
}

Recall from “The Slice Type” section in Chapter 4 that slices are a pointer to some data and the length of the slice. We use the len method to get the length of a slice and the as_mut_ptr method to access the raw pointer of a slice. In this case, because we have a mutable slice to i32 values, as_mut_ptr returns a raw pointer with the type *mut i32, which we’ve stored in the variable ptr.

We keep the assertion that the mid index is within the slice. Then we get to the unsafe code: the slice::from_raw_parts_mut function takes a raw pointer and a length, and it creates a slice. We use this function to create a slice that starts from ptr and is mid items long. Then we call the add method on ptr with mid as an argument to get a raw pointer that starts at mid, and we create a slice using that pointer and the remaining number of items after mid as the length.

The function slice::from_raw_parts_mut is unsafe because it takes a raw pointer and must trust that this pointer is valid. The add method on raw pointers is also unsafe, because it must trust that the offset location is also a valid pointer. Therefore, we had to put an unsafe block around our calls to slice::from_raw_parts_mut and add so we could call them. By looking at the code and by adding the assertion that mid must be less than or equal to len, we can tell that all the raw pointers used within the unsafe block will be valid pointers to data within the slice. This is an acceptable and appropriate use of unsafe.

Note that we don’t need to mark the resulting split_at_mut function as unsafe, and we can call this function from safe Rust. We’ve created a safe abstraction to the unsafe code with an implementation of the function that uses unsafe code in a safe way, because it creates only valid pointers from the data this function has access to.

In contrast, the use of slice::from_raw_parts_mut in Listing 20-7 would likely crash when the slice is used. This code takes an arbitrary memory location and creates a slice 10,000 items long.

fn main() {
    use std::slice;

    let address = 0x01234usize;
    let r = address as *mut i32;

    let values: &[i32] = unsafe { slice::from_raw_parts_mut(r, 10000) };
}

We don’t own the memory at this arbitrary location, and there is no guarantee that the slice this code creates contains valid i32 values. Attempting to use values as though it’s a valid slice results in undefined behavior.

Using extern Functions to Call External Code

Sometimes, your Rust code might need to interact with code written in another language. For this, Rust has the keyword extern that facilitates the creation and use of a Foreign Function Interface (FFI). An FFI is a way for a programming language to define functions and enable a different (foreign) programming language to call those functions.

Listing 20-8 demonstrates how to set up an integration with the abs function from the C standard library. Functions declared within extern blocks are usually unsafe to call from Rust code, so they must also be marked unsafe. The reason is that other languages don’t enforce Rust’s rules and guarantees, and Rust can’t check them, so responsibility falls on the programmer to ensure safety.

unsafe extern "C" {
    fn abs(input: i32) -> i32;
}

fn main() {
    unsafe {
        println!("Absolute value of -3 according to C: {}", abs(-3));
    }
}

Within the unsafe extern "C" block, we list the names and signatures of external functions from another language we want to call. The "C" part defines which application binary interface (ABI) the external function uses: the ABI defines how to call the function at the assembly level. The "C" ABI is the most common and follows the C programming language’s ABI.

This particular function does not have any memory safety considerations, though. In fact, we know that any call to abs will always be safe for any i32, so we can use the safe keyword to say that this specific function is safe to call even though it is in an unsafe extern block. Once we make that change, calling it no longer requires an unsafe block, as shown in Listing 20-9.

unsafe extern "C" {
    safe fn abs(input: i32) -> i32;
}

fn main() {
    println!("Absolute value of -3 according to C: {}", abs(-3));
}

Marking a function as safe does not inherently make it safe! Instead, it is like a promise you are making to Rust that it is safe. It is still your responsibility to make sure that promise is kept!

#![allow(unused)]
fn main() {
#[unsafe(no_mangle)]
pub extern "C" fn call_from_c() {
    println!("Just called a Rust function from C!");
}
}

Accessing or Modifying a Mutable Static Variable

In this book, we’ve not yet talked about global variables, which Rust does support but can be problematic with Rust’s ownership rules. If two threads are accessing the same mutable global variable, it can cause a data race.

In Rust, global variables are called static variables. Listing 20-10 shows an example declaration and use of a static variable with a string slice as a value.

static HELLO_WORLD: &str = "Hello, world!";

fn main() {
    println!("name is: {HELLO_WORLD}");
}

Static variables are similar to constants, which we discussed in the “Differences Between Variables and Constants” section in Chapter 3. The names of static variables are in SCREAMING_SNAKE_CASE by convention. Static variables can only store references with the 'static lifetime, which means the Rust compiler can figure out the lifetime and we aren’t required to annotate it explicitly. Accessing an immutable static variable is safe.

A subtle difference between constants and immutable static variables is that values in a static variable have a fixed address in memory. Using the value will always access the same data. Constants, on the other hand, are allowed to duplicate their data whenever they’re used. Another difference is that static variables can be mutable. Accessing and modifying mutable static variables is unsafe. Listing 20-11 shows how to declare, access, and modify a mutable static variable named COUNTER.

static mut COUNTER: u32 = 0;

/// SAFETY: Calling this from more than a single thread at a time is undefined
/// behavior, so you *must* guarantee you only call it from a single thread at
/// a time.
unsafe fn add_to_count(inc: u32) {
    COUNTER += inc;
}

fn main() {
    unsafe {
        // SAFETY: This is only called from a single thread in `main`.
        add_to_count(3);
        println!("COUNTER: {}", COUNTER);
    }
}

As with regular variables, we specify mutability using the mut keyword. Any code that reads or writes from COUNTER must be within an unsafe block. This code compiles and prints COUNTER: 3 as we would expect because it’s single threaded. Having multiple threads access COUNTER would likely result in data races, so it is undefined behavior. Therefore, we need to mark the entire function as unsafe, and document the safety limitation, so anyone calling the function knows what they are and are not allowed to do safely.

Whenever we write an unsafe function, it is idiomatic to write a comment starting with SAFETY and explaining what the caller needs to do to call the function safely. Likewise, whenever we perform an unsafe operation, it is idiomatic to write a comment starting with SAFETY to explain how the safety rules are upheld.

With mutable data that is globally accessible, it’s difficult to ensure there are no data races, which is why Rust considers mutable static variables to be unsafe. Where possible, it’s preferable to use the concurrency techniques and thread-safe smart pointers we discussed in Chapter 16 so the compiler checks that data accessed from different threads is done safely.

Implementing an Unsafe Trait

We can use unsafe to implement an unsafe trait. A trait is unsafe when at least one of its methods has some invariant that the compiler can’t verify. We declare that a trait is unsafe by adding the unsafe keyword before trait and marking the implementation of the trait as unsafe too, as shown in Listing 20-12.

unsafe trait Foo {
    // methods go here
}

unsafe impl Foo for i32 {
    // method implementations go here
}

fn main() {}

By using unsafe impl, we’re promising that we’ll uphold the invariants that the compiler can’t verify.

As an example, recall the Sync and Send marker traits we discussed in the “Extensible Concurrency with the Sync and Send Traits” section in Chapter 16: the compiler implements these traits automatically if our types are composed entirely of Send and Sync types. If we implement a type that contains a type that is not Send or Sync, such as raw pointers, and we want to mark that type as Send or Sync, we must use unsafe. Rust can’t verify that our type upholds the guarantees that it can be safely sent across threads or accessed from multiple threads; therefore, we need to do those checks manually and indicate as such with unsafe.

Accessing Fields of a Union

The final action that works only with unsafe is accessing fields of a union. A union is similar to a struct, but only one declared field is used in a particular instance at one time. Unions are primarily used to interface with unions in C code. Accessing union fields is unsafe because Rust can’t guarantee the type of the data currently being stored in the union instance. You can learn more about unions in the Rust Reference.

Using Miri to check unsafe code

When writing unsafe code, you might want to check that what you have written actually is safe and correct. One of the best ways to do that is to use Miri, an official Rust tool for detecting undefined behavior. Whereas the borrow checker is a static tool which works at compile time, Miri is a dynamic tool which works at runtime. It checks your code by running your program, or its test suite, and detecting when you violate the rules it understands about how Rust should work.

Using Miri requires a nightly build of Rust (which we talk about more in Appendix G: How Rust is Made and “Nightly Rust”). You can install both a nightly version of Rust and the Miri tool by typing rustup +nightly component add miri. This does not change what version of Rust your project uses; it only adds the tool to your system so you can use it when you want to. You can run Miri on a project by typing cargo +nightly miri run or cargo +nightly miri test.

For an example of how helpful this can be, consider what happens when we run it against Listing 20-11:

$ cargo +nightly miri run
   Compiling unsafe-example v0.1.0 (file:///projects/unsafe-example)
    Finished `dev` profile [unoptimized + debuginfo] target(s) in 0.01s
     Running `/Users/chris/.rustup/toolchains/nightly-aarch64-apple-darwin/bin/cargo-miri runner target/miri/aarch64-apple-darwin/debug/unsafe-example`
warning: creating a shared reference to mutable static is discouraged
  --> src/main.rs:14:33
   |
14 |         println!("COUNTER: {}", COUNTER);
   |                                 ^^^^^^^ shared reference to mutable static
   |
   = note: for more information, see <https://doc.rust-lang.org/nightly/edition-guide/rust-2024/static-mut-references.html>
   = note: shared references to mutable statics are dangerous; it's undefined behavior if the static is mutated or if a mutable reference is created for it while the shared reference lives
   = note: `#[warn(static_mut_refs)]` on by default

COUNTER: 3

It helpfully and correctly notices that we have shared references to mutable data, and warns about it. In this case, it does not tell us how to fix the problem, but it means that we know there is a possible issue and can think about how to make sure it is safe. In other cases, it can actually tell us that some code is sure to be wrong and make recommendations about how to fix it.

Miri doesn’t catch everything you might get wrong when writing unsafe code. For one thing, since it is a dynamic check, it only catches problems with code that actually gets run. That means you will need to use it in conjunction with good testing techniques to increase your confidence about the unsafe code you have written. For another thing, it does not cover every possible way your code can be unsound. If Miri does catch a problem, you know there’s a bug, but just because Miri doesn’t catch a bug doesn’t mean there isn’t a problem. Miri can catch a lot, though. Try running it on the other examples of unsafe code in this chapter and see what it says!

When to Use Unsafe Code

Using unsafe to take one of the five actions (superpowers) just discussed isn’t wrong or even frowned upon. But it is trickier to get unsafe code correct because the compiler can’t help uphold memory safety. When you have a reason to use unsafe code, you can do so, and having the explicit unsafe annotation makes it easier to track down the source of problems when they occur. Whenever you write unsafe code, you can use Miri to help you be more confident that the code you have written upholds Rust’s rules.