21. ISO 26262 2-6

21.1. 2-6 Project Dependent Safety Management

21.1.1. 6.4.2

Lifecycle Phases Overview.

21.1.1.1. 6.4.2.3

The project manager and safety manager defined in Qualification Plan - Ferrocene Organization make sure that sufficient resources are available.

21.1.1.2. 6.4.2.4

Lifecycle Phases Overview.

21.1.2. 6.4.3

Not applicable, as not at item level or modification, new development

21.1.3. 6.4.4

Not applicable, as not a reuse of an existing element, handled as new development

21.1.4. 6.4.5

21.1.4.1. 6.4.5.1

See below, tailored as per SW SEooC guidance

21.1.4.1.1. 6.4.5.1.a

See below, tailored as per SW SEooC guidance

21.1.4.1.2. 6.4.5.1.b

See below, tailored as per SW SEooC guidance

21.1.4.2. 6.4.5.2

Not applicable, no modification/impact analysis

21.1.4.3. 6.4.5.3

Not applicable, no proven in use applied

21.1.4.4. 6.4.5.4

Not applicable, no HW in scope

21.1.4.5. 6.4.5.5

Not applicable, no SW qualification, handled as new development

21.1.4.6. 6.4.5.6

Not applicable, no tailoring based on specific tool usage

21.1.4.7. 6.4.5.7

Covered by Certification scope.

21.1.4.7.1. 6.3.5.7.a

Covered by “Assumed Requirements” in Requirements Management.

21.1.4.7.2. 6.4.5.7.b

Covered by “Assumed Requirements” in Requirements Management.

21.1.4.8. 6.4.5.8

Not applicable, T&B not in scope

21.1.4.9. 6.4.5.9

Not applicable, T&B not in scope

21.1.5. 6.4.6

21.1.5.1. 6.4.6.1

Lifecycle Phases Overview.

21.1.5.2. 6.4.6.2

Lifecycle Phases Overview.

21.1.5.3. 6.4.6.3

Lifecycle Phases Overview.

21.1.5.4. 6.4.6.4

21.1.5.4.1. 6.4.6.4.a

Included in the project plan.

21.1.5.4.2. 6.4.6.4.b

Safety Plan

21.1.5.5. 6.4.6.5

21.1.5.5.1. 6.4.6.5.a

See above.

21.1.5.5.2. 6.4.6.5.b

See above.

21.1.5.5.3. 6.4.6.5.c

See above.

21.1.5.5.4. 6.4.6.5.d

See above, no DIA.

21.1.5.5.5. 6.4.6.5.e

Testing Plan

21.1.5.5.6. 6.4.6.5.f

Covered by Safety Assessment in Safety Plan.

21.1.5.5.7. 6.4.6.5.g

Covered by HazOp analysis.

21.1.5.5.8. 6.4.6.5.h

Not applicable, no proven in use applied.

21.1.5.5.9. 6.4.6.5.i

Tool safety assessments.

21.1.5.6. 6.4.6.6

21.1.5.6.1. 6.4.6.6.a

Purpose of this document

21.1.5.6.2. 6.4.6.6.b

Lifecycle Phases Overview.

21.1.5.6.3. 6.4.6.6.c

Lifecycle Phases Overview.

21.1.5.6.4. 6.4.6.6.d

Resource planning is covered in the project management tool listed in Development Process.

21.1.5.6.5. 6.4.6.6.e

Time planning is covered in the project management tool listed in Development Process.

21.1.5.6.6. 6.4.6.6.f

Deliverables and Documents.

21.1.5.7. 6.4.6.7

Not applicable, no modification/impact analysis

21.1.5.7.1. 6.4.6.7.a

Not applicable, no modification/impact analysis

21.1.5.7.2. 6.4.6.7.b

Not applicable, no modification/impact analysis

21.1.5.7.3. 6.4.6.7.c

Not applicable, no modification/impact analysis

21.1.5.8. 6.4.6.8

Safety plan updates are tracked in the project management tool listed in Development Process.

21.1.5.9. 6.4.6.9

Deliverables and Documents.

21.1.5.10. 6.4.6.10

Not applicable, no distributed development (upstream/open source not handled as distributed development).

21.1.6. 6.4.7

21.1.6.1. 6.4.7.1

Safety Plan Tracking of open activities in Clickup

21.1.6.2. 6.4.7.2

21.1.7. 6.4.8

21.1.7.1. 6.4.8.1

Safety activities are tracked in the project management tool listed in Development Process. Each release has a checklist of safety activities.

Each release is formally approved as described in Infrastructure.

21.1.7.2. 6.4.8.2

Safety activities are tracked in the project management tool listed in Development Process. Each release has a checklist of safety activities.

Each release is formally approved as described in Release Process.

21.1.8. 6.4.9

21.1.8.1. 6.4.9.1

All modifications to the qualification or safety documents undergo review by an independent reviewer (I1) as described in Development Process and subsequently each final release undergoes formal review and approval by the release manager (I3) as described in Release Process.

21.1.8.1.1. 6.4.9.1.a

See 6.4.9.1.

21.1.8.1.2. 6.4.9.1.b

See 6.4.9.1.

21.1.8.1.3. 6.4.9.1.c

See 6.4.9.1.

21.1.8.2. 6.4.9.2

Lifecycle Phases Overview.

The safety managers has full access to the safety documentation, development process and team, when reviewing and confirming the safety plan as described in Qualification Plan - Documentation Validation.

21.1.8.3. 6.4.9.3

Lifecycle Phases Overview.

The safety managers has full access to the safety documentation, development process and team, when reviewing and confirming the safety plan as described in Qualification Plan - Documentation Validation.

21.1.9. 6.4.10

21.1.9.1. 6.4.10.1

See 6.4.9.1.

21.1.9.2. 6.4.10.2

See 6.4.9.1.

21.1.9.3. 6.4.10.3

See 6.4.9.1.

21.1.9.4. 6.4.10.4

See 6.4.9.1.

21.1.9.5. 6.4.10.5

See 6.4.9.1.

21.1.10. 6.4.11

TÜV SÜD responsibility

21.1.11. 6.4.12

TÜV SÜD responsibility

21.1.12. 6.4.13

21.1.12.1. 6.4.13.1

Safety Case.

21.1.12.2. 6.4.13.2

Safety Case.

21.1.12.3. 6.4.13.3

Safety Case.

21.1.12.4. 6.4.13.4

Test results overview

21.1.12.4.1. 6.4.13.4.a

See “Release Validation” in Validation Process.

21.1.12.4.2. 6.4.13.4.b
21.1.12.4.3. 6.4.13.4.c
21.1.12.4.4. 6.4.13.4.d

Test results overview

21.1.12.5. 6.4.13.5